www.467cc.cn-无人在线观看高清电影电视剧,无码少妇一区二区三区免费,午夜福利视频,欧美爆乳乱妇高清免费888

S78-4-01減振墊鐵適用范圍：
木工、紡織、印染、化工、塑料、電工、食品等一般機械設備。
Application:
Woodworker, Rubber and plastic machines, Spinning machines, Food process machines and etc.

S78-4-01減振墊鐵特點：
1、 安裝機床不需埋設地腳螺栓，縮短安裝周期，節省安裝費用。
2、 根據生產工藝變化，隨意調整機床位置，實現生產流水線柔性化設計。
3、 調整機床水平方便,迅速。
4、 隔振、減振,降低噪音。
5、 耐油性，耐腐蝕性強
Feature of product:
1. Machines are stationary on floor without anchors. Therefore the cost and time of installation can be greatly saved.
2. The layout of machines can be changed freely according to the modification of manufacturing process. So it is easy to design the flexible production line.
3. It is convenient and quick to adjust the level of machine.
4. Vibration and noise can be reduced and isolated by using this product.
5. It can resist oil and corrosion greatly.

S78-4系列如何正確選擇：
1、確定機床重量及機床基座緊固地腳孔數量。
2、墊鐵承載能力F（kg）>機床總重量（kg） /支撐點個數
（特殊情況，考慮機床重心位置，確定重量分配）。
3、檢查機床基座孔直徑、長度是否符合。
How to choose:
1. Decide the weight of machine and the quantity of anchors of machine base.
2. The resisting load of mount F（Kg）>Total weight of machine （Kg）/number of mounts（Think of barycenter of machine and decide allocation of weight）
3. Check if the diameter and length of anchor hole accord with this chart .

S78-4系列使用方法：

1、將所需墊鐵放入機床地腳下，穿入并順時針旋轉螺栓，使承重盤升起與機床接觸。
2、進行機床水平調節（螺栓順時針旋轉，機床升起）。
3、調整機床水平后，鎖緊圓螺母，固定水平狀態。
注意：因為橡膠的蠕變現象，在墊鐵使用兩周后，再調節一次機床水平。
How to install:
1. Place the mounts under the anchor hole of the machine. Insert the bolt into the screw hole of mount. And screw clock wise then lift the plate till it reach the machine base.
2. Adjust the level of machine （screw the bolt clockwise then lift the machine ）.
3. Tighten the nuts after adjust the level of machine.
Note : The level of machine should be readjusted after two weeks in use because the rubber may creep when it is used firstly.

S78-4系列技術參數及選用表:
Specification and chart for choice: