您好, 歡迎來到機床商務網
會員1.png)
| 安裝形式 | 落地式 | 布局形式 | 臥式 |
|---|---|---|---|
| 產地 | 國產 | 機床大小 | 中型 |
| 機床自重 | 3500kg | 界面語言 | 中文 |
| 控制形式 | 數控 | 外形尺寸(長×寬×高) | 2200*1760*1840mm |
| 銷售區域 | 全國 |
適用于閥門衛浴行業的加工；
產品簡介
詳細介紹
XC-V8 V10臥式高速八軸、十軸鉆銑攻衛浴專機特點
1、機床的鑄件均采用灰口鑄鐵，經過人工時效處理，穩定性好，強度高，各項精度
穩定可靠。
The castings of machine tools are all made of grey cast iron.After arti
ficial aging treatment,the stability is good,the strength is high,and the
precision is stable and reliable.
2、機床主軸采用*的炮筒結構，軸承采用 P4 級主軸軸承，讓主軸具有更高的
精度，和穩定性。
The spindle of the machine tool adopts an advanced barrel structure
and the bearings adopt P4 spindle bearings allowing the spindle to
have higher accuracy and stability.
3、機床X/Z傳動的滾珠絲桿均采用中國臺灣上銀提供的 C3 級滾珠絲桿，滾珠絲桿倆
端均采用進口的 P4 級 60 度角接觸配合組合的滾珠絲桿軸承，且倆軸滾
珠絲桿均進行預拉伸。更確保加工工件精度的穩定性。X/Z倆軸均采用直聯
式聯軸器連接，傳動剛性強，精度穩定性高；
The ball screws of machine tool X/Z drive adopt the C3 ball screw
providedby Taiwan Shangyin. Both of the ball sctew′s two end uses
the imported P4 class 60- degree angle contact and cooperate with
the ball screw special bearing.Shaft ball screws are pre-tensioned.To
ensure the stability of the accuracy of the processing workpiece.Both
X/Z shafts are connected bya direct- coupling coupling,which has
strong transmission rigidity and highaccuracy and stability.
4、機床X/Z倆軸滑軌均采用中國臺灣上銀提供的 P 級。大大降低導軌間的摩擦力，消
除了導軌可能生產的爬行現象，提高了機床的運動精度；
Both X/Z axis slides of the machine tool adopt the P grade provided
by Taiwan Sapphire.The friction between the guide rails is greatly re
duced,the crawling phenomenon that the guide rails may produce is
eliminated,and the movement accuracy of the machine tool is im
proved.
5、全封閉式防護，更好地保護導軌、絲桿及軸承；
The use of fully enclosed protection,better protection of the guide,
screw and bearing;
6、采用集中式潤滑油路，讓機床導軌絲桿部分得到充分的潤滑，大大提高機床使
用壽命和機床精度；
The use of a centralized lubrication road will allow sufficient lubrication
of the guide rail screw section of the machine tool,greatly improving
the service life of the machine tool and accuracy of the machine tool.
7、機床伺服電機采用品牌驅動電機，定位精度高，速度快，讓加工效果更精確更穩
定；
The use of brand motor drive servo motor,positioning accuracy,speed,
let the processing effect is more accuratd and more stable. Machine
tool servo motor driven by brand, positioning accuracy, high speed, let
the processing effect is more accurate and stable.
XC-V8 V10 臥式高速八軸、十軸鉆銑攻衛浴專機技術參數
XC-V8 V10 臥式高速八軸、十軸鉆銑攻衛浴專機技術參數
機床商務網