機床商務網
詳細介紹
滑塊八面導向，導軌長，保證運行精度；
Octahedral guiding of sliderａnd long guide rail can guarantee operation precision.
液壓過載保護裝置，過載自動緊急停車，保護 壓力機和模具安全，使用方便；
Hydraulic overload protection device and overload automatic emergency cut-off can protect safety of press machines and moulds, with convienent application.
性能特點 Performance feature
| PLC電氣集中控制，具有急停、寸動、單次、連續操作規范； | PLC electric interlocking control possesses sudden-stop, inch, single-pass, and continuous operation specifications; |
| 干式氣動摩擦離合器，噪音小，離合扭矩大，制動角度小，維護方便; | Dry pneumatic friction clutch is small in noise, large in clutching torque, small in braking angle, and convenient in maintenance; |
| 機身為橫梁、立柱、底座分體閉式結構，用四根拉緊螺桿拉緊，剛性 好(400-1200); | Body is closed structure, including beams, stａnd columns, and bases, which is strained with four tie bolts, with good rigidity (400-1200); |
標準配置 Standard configuration
| ＞油壓式過載保護裝置 | > Hydraulic overload protector |
| ＞電動式滑塊調整裝置 | > Electric slider adjusting device |
| ＞獨立式控制箱 | > Indepence electrical control cabinet |
| ＞移動式操作臺 | > Movable operation platfom |
| ＞數字式模高指示器(0.1 MM) | > Digital die height indicator (unit: 0.1 mm) |
| ＞循環集中式潤滑給油裝置 | > Circulation type lubrication device |
| ＞電源插座 | > Power socket |
| ＞二度落保護裝置 | > Over-run safety device |
| ＞誤送檢測裝置 | > Misfeed detection consent |
| ＞預調計數器6位數 | > Pre-determined counter (6 digits) |
| ＞噴風裝置1/2 - 一回路 | > Air-blast device 1/2" one circuit |
| ＞空氣源接頭1/2-二回路 | > Air source connector 1/2" two circuit |
| ＞變頻器 | > Inverter |
選擇配置 Optional configuration
| ＞模墊裝置 | > Die lamp |
| ＞光電安全裝置 | > Quick die change device |
| ＞滑塊上部打料裝置 | > Moving bolster |
| ＞安全擋塊及安全插銷 | > Automatic feeding system |
| ＞防震裝置 | > Die cushion |
| ＞模具照明燈 | > Photo-electric safety device |
| ＞快速換模裝置 | > Slide knock-out device |
| ＞移動式臺車 | > Safety block and safety latch |
| ＞自動送料系統 | > Anti-vibration pads |
| > Die lamp |
技術參數 Technical parameters
| 名稱 | Name | 單位 | YDPY-300 | YDPY-400 | YDPY-500 | |||
| 型式 | Model | s | H | s | H | s | H | |
| 噸數 | Capacity | ton | 300 | 400 | 500 | |||
| 沖力發生位置 | Rated tonnage point | mm | 9 | 7 | 13 | 7 | 13 | 7 |
| 行程 | Stroke | mm | 350 | 250 | 400 | 300 | 400 | 300 |
| 每分鐘行程數 | Speed changing | s.p.m | 20-30 | 30-50 | 15-25 | 35-40 | 15-25 | 25-40 |
| 裝模咼度 | Max.die hight | mm | 600 | 650 | 600 | 650 | 650 | 700 |
| 滑塊調整量 | Slide adjustment | mm | 150 | 150 | 200 | |||
| 上工作臺尺寸 | Slide area | mm | 2500x1300 | 2800x1300 | 3100x1400 | |||
| 下工作臺尺寸 | Bolster area | mm | 2500x1300 | 2800x1400 | 3100x1500 | |||
| 側面開口 | Side opening | mm | 700x500 | 850x600 | 950x650 | |||
| 模墊能力 | Die cushion capacity | ton | 30 | 60 | 70 | |||
| 名稱 | Name | 單位 | YDPY-600 | YDPY-800 | YDPY-1000 | |||
| 型式 | Model | s | H | s | H | s | H | |
| 噸數 | Capacity | ton | 600 | 800 | 1000 | |||
| 沖力發生位置 | Rated tonnage point | mm | 13 | 9 | 13 | 9 | 13 | 9 |
| 行程 | Stroke | mm | 400 | 300 | 400 | 300 | 400 | 300 |
| 每分鐘行程數 | Speed changing | s.p.m | 15-25 | 20-30 | 15-25 | 20-30 | 15-25 | 20-30 |
| 裝模咼度 | Max.die hight | mm | 650 | 700 | 700 | 750 | 1000 | 1050 |
| 滑塊調整量 | Slide adjustment | mm | 200 | 250 | 250 | |||
| 上工作臺尺寸 | Slide area | mm | 3600x1400 | 3800x1600 | 4600x1800 | |||
| 下工作臺尺寸 | Bolster area | mm | 3600x1500 | 3800x1600 | 4600x1800 | |||
| 側面開口 | Side opening | mm | 1000x700 | 1100x800 | 1200x900 | |||
| 模墊能力 | Die cushion capacity | ton | 80 | 80 | 80 | |||
| 名稱 | Name | 單位 | YDPY-301 | YDPY-401 | YDPY-501 | |||
| 型式 | Model | s | H | s | H | s | H | |
| 噸數 | Capacity | ton | 269.6666667 | 271 | 204.3333333 | |||
| 沖力發生位置 | Rated tonnage point | mm | 294.6666667 | 493 | 271 | 593 | 154.3333333 | 593 |
| 行程 | Stroke | mm | 319.6666667 | 736 | 271 | 886 | 104.3333333 | 886 |
| 每分鐘行程數 | Speed changing | s.p.m | 20-31 | 30-51 | 15-26 | 35-41 | 15-26 | 25-41 |
| 裝模咼度 | Max.die hight | mm | -300 | 651 | -300 | 651 | -250 | 701 |
| 滑塊調整量 | Slide adjustment | mm | -750 | -750 | -700 | |||
| 上工作臺尺寸 | Slide area | mm | 2500x1300 | 2800x1500 | 3100x1600 | |||
| 下工作臺尺寸 | Bolster area | mm | 2500x1300 | 2800x1600 | 3100x1700 | |||
| 側面開口 | Side opening | mm | 700x501 | 850x601 | 950x651 | |||
| 模墊能力 | Die cushion capacity | ton | 31 | 61 | 71 | |||
| 名稱 | Name | 單位 | YDPY-601 | YDPY-801 | YDPY-1001 | |||
| 型式 | Model | s | H | s | H | s | H | |
| 噸數 | Capacity | ton | 137.6666667 | 4.333333333 | -129 | |||
| 沖力發生位置 | Rated tonnage point | mm | 37. | 591 | -195.6666667 | 591 | -429 | 591 |
| 行程 | Stroke | mm | -62. | 882 | -395.6666667 | 882 | -729 | 882 |
| 每分鐘行程數 | Speed changing | s.p.m | 15-26 | 20-31 | 15-26 | 20-31 | 15-26 | 20-31 |
| 裝模咼度 | Max.die hight | mm | -250 | 701 | -200 | 751 | -500 | 1051 |
| 滑塊調整量 | Slide adjustment | mm | -700 | -650 | -1250 | |||
| 上工作臺尺寸 | Slide area | mm | 3600x1600 | 3800x1600 | 4600x1800 | |||
| 下工作臺尺寸 | Bolster area | mm | 3600x1700 | 3800x1600 | 4600x1800 | |||
| 側面開口 | Side opening | mm | 1000x701 | 1100x801 | 1200x901 | |||
| 模墊能力 | Die cushion capacity | ton | 81 | 81 | 81 | |||
機床商務網