德國 HASKEL 液壓泵 dyz-秦皇島維克托國際貿易有限公司

Petroleum base oils, Kerosene, Diesel fuel, with 5% soluble oil.
Plain Water.
Most phosphate Ester base fire resistant hydraulic fluids:e.g., Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosate 1120 and Petroleum base solvents compatible with UHMWPE (Ultrahigh Molecular Weight Polyethylene) dynamic, and Viton static seals.
Petroleum base solvents,e.g., Boron fuels, Aromatic hydrocarbons( Benzene ,Toluene Xylene, Hylene, etc.);Chlorinated solvents (Trichloroethylene, Carbon Tetrachloride,? Chlorobenzene ,etc.); Mecaptans, Dowtherm A, Fluoronated solents(Fluorobenzene, Fluorochloroethylene ,etc.); Dowtherm E, plus all of group 3 plus some mildly corrosive acids compatible with wetted materials.
See note (5A) for service with Methyl-Ethy-Ketone, Methyl Acetone, Diacetone, Alcohol and Freon 22
Skydrol and Aerosafe hydraulic fluid. Acetone and some alcohols (Ethy, Methy and isopropyl).Also suitable for these fluid if viton static seals replaced with EPR, specify modification number 51331(no extra change),e.g..5133-MDTV-5.(Most Phosphate Estar base fluids solidify at approximately 206 MPa .)
Deionized water.
NOTE: a) Dynamic seal life with non-lubricating fluids will understandably be less than with lubricating type.
b) Consult factory for additional chemical resistance data.

HASKEL 1/3HP PUMP 【1/3馬力（0.25Kw）haskel液體增壓泵系列】

型號	序號	壓縮比（增壓比）	較高輸出壓力		排量/循環
MODEL	RATIO DASH NO.	ACTUAL AREA RATIO	MAXIMUM RATED OUTPUT PRESSURE		DISPLACE MENT /CYCLE
MODEL	RATIO DASH NO.	ACTUAL AREA RATIO	CONTINUOUS (連續輸出)MPa	INTERMITTENT （間歇輸出）MPa	DISPLACE MENT /CYCLE
M,MDTV,MDSTV	-5	-5.6	4.3	4.3	0.83	13.6
M, MS	-7	7.8	6.2	6.2	0.60	9.8
M, MS	-12	14	10.3	10.3	0.36	5.9
M,MS,MCPV, 29723 (1)	-21	25	17.9	17.9	0.20	3.3
	-36	41	31	31	0.12	2.0
	-71	82	60.7	60.7	.060	1.0
	-110	126	93.1	93.1	.039	0.6
M, MS (1)	-188	217	103.4	103.4	.023	0.4

Maximum intermittent pressure for stainless steel in MS, 29723 and MCPV series pumps is 69MPa

2. 較高驅動氣壓力0.85MPa( Maximum drive pressure0.85MPa)

型號	服務介質	材質		非金屬材質
MODE	SERVICES	WETTED MATERIALS		NON METALLICS
MODE	SERVICES	泵部分 PUMP SECTION	活塞部分 PLUNGERS	NON METALLICS
M	[1]	Cad plated steel,luminum & SS	416 SS	Urethane, PTEF,Buna
MS	[1][2]	All SS	316 SS	UHMWPE, PTEE, Buna
MDTV	[1][3][5]	Separtion-Aluminum & SS	416 SS	PTFE, Viton
MDSTV	[1][2][3][4][5]	Separtion - All SS	416 SS	PTFE, Viton
MCPV	[1][2][3][4][5]	Separtion - All SS	15.5PH SS	PTFE, Viton
29723	[1][2][3][5][6]	Separtion - All SS	Hard Chrome Plated 15.5PH SS + Dichronite	UHMWPE, PTFE, Ryton