FC Series-Manual Lathe-順詮精機(jī)股份有限公司

參考價(jià)	面議

產(chǎn)品簡介

SpecificationsAccessoriesFeatureMODELFC-1640FC-1660FC-1840FC-1860FC-1880FC-2140FC-2160FC-2180CapacityHeightofcenters205mm(8

詳細(xì)介紹

Specifications
Accessories
Feature

MODEL			FC-1640	FC-1660	FC-1840	FC-1860	FC-1880	FC-2140	FC-2160	FC-2180
Capacity	Height of centers		205 mm (8.07")		231 mm (9.05")			271 mm (10.67")
	Swing over bed		410 mm (16.14")		Ø462 mm (18.11")			Ø542 mm (21.34")
	Swing in gap		583 mm (22.95")		Ø650 mm (25.59")			Ø730 mm (28.74")
	Swing over cross slide		262 mm (10.3")		Ø305 mm (12")			Ø387 mm (15.23")
	Distance between centers		1000 mm (40")	1500 mm (60")	1000 mm (40")	1500 mm (60")	2200 mm (86.6")	1000 mm (40")	1500 mm (60")	2200 mm (86.6")
	Width of bed		320mm (12.5")
Headstock and Main Spindle	Spindle nose, internal taper		D1-8 / A1-8 (opt.), Ø85mm Taper 1/19.18
	Spindle center sleeve		Ø85mm Taper 1/19.18 x MT. No.5
	Spindle bore		Ø80mm (3.149")
	Spindle speed: Gear steps / Range		12 steps /
			A			26	40	60	90	rpm
			B			105	145	205	305	rpm
			C			510	715	1000	1500	rpm
Carriage	Cross slide travel		250 mm (9.84")				300 mm (11.81")
Carriage	Top slide travel		150 mm (5.9")
Threads and Feeds	Whitworth threads: Kinds / Range		45 kinds / 2~72 T.P.I..
	Metric threads: Kinds / Range		39 kinds / 0.2~14 mm
	D.P. threads: Kinds / Range		21 kinds / 8~44 D.P.
	M.P. threads: Kinds / Range		18 kinds / 0.3~3.5 M.P.
	Longitudinal feeds		0.04~1.0 (0.0015"~0.04")
	Cross feeds		0.02~0.5 (0.00075"~0.02")
Tailstock	Quill diameter		Ø59 mm (2.322")				Ø68 mm (2.677")	Ø59 mm (2.322")		Ø68 mm (2.677")
	Quill travel		127 mm (5")				153 mm (6")	127 mm (5")		153 mm (6")
	Taper of center		MT. No.4
Motor	Main spindle		std. 10 HP (7.5 kW) opt. 12.5 HP (9.375 kW)
	Forced lubrication for headstock		N/A
	Coolant pump		1/8 HP
Measurement	Weight Approx	NET	1750kgs	1900kgs	1800kgs	1950kgs	2350kgs	1850kgs	2000kgs	2400kgs
	Packing size	GROSS	1950kgs	2150kgs	2000kgs	2200kgs	2650kgs	2050kgs	2250kgs	2700kgs
		Length	2400mm	2900mm	2400mm	2900mm	3700mm	2400mm	2900mm	3700mm
		Width x Height	width 1155 mm (45.5") X height 1900 mm (74.8")

Specifications subject to change without notice.

Standard Accessories：

Backplate for 10" chuck
Dead center MT.5
Dead center MT.4 with carbide tip
Spindle center sleeve.Ø85mm Taper 1/19.18
Level pads......6 pcs
Tool set & Box
Operation manual & parts list
Full length splash guard
Halogen lamp

Optional Accessories：

3-Jaws scroll 10" chuck
4-Jaws independent 12" chuck

Faceplate 14"

Chuck Safety Guards

Electrical system for CE

Digital read out system

Carriage micro stop set

Drill chuck & arbor

Rotating center MT.4

Taper turning attachment

Steady rest w/ball bearing

Follow rest w/bronze tip

Quick change tool post

Protect cover on leadscrew for CE

All castings are properly stabilized and stress relieved.
Bed ways are hardened & ground to min. HRC48-55.
Turcite B coating between the bed and carriage.
Extremely low noise level.
Foot brake pedal provided.
Built-in coolant pump & fitting provided.
Wider bed way which give absorbs vibration.
Y-Δ type spindle motor equipped to make sure smooth start and operatrion.

Headstock

Housing is vibration-absorbent, deflection-free.
Gears are hardened & MAAG or REISHAUER ground.

Gear Box

Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

Apron

R/H or L/H wheel can be available on request.
Integrated automatic control for longitudinal & cross feeds, forward &reverse feeds.

Carriage & Slide

Anti-Float design backlash eliminator fitted in cross slide nut.
Safety clutch at feed shaft.
Oneshot lubrication in carriage & top slide.
Dual dials supply inchsystem screw.
Metric dial supply metric system only.

Safety Features

Nylon safety gears in end train.
Shear pin in leadscrew.

Heavy Duty Spindle

Machined from forged alloy steel, hardened ground & dynamically balanced.
Three point support by high grade precision, machine tool taper roller & ball bearings.