1440NC-CNC Lathe-高尚精機股份有限公司

參考價	面議

產品簡介

CNCLATHE(Flat-bedtype)Model:1440NCFEATURES:˙FANUC,FAGOR,SIEMENS,SYNTECcontrolareavailable

詳細介紹

CNC LATHE (Flat-bed type)

Model: 1440NC

FEATURES:

˙FANUC, FAGOR, SIEMENS, SYNTEC control areavailable.

˙CNC and manual operation.

˙Electronic hand-wheels for manual turning.

˙Teach in mode.

˙Integrated PLC.

˙Semi-automatic, automatic (cycle) and partprogram modes.

˙Rapid traverse.

˙Automatic home searching.

˙30-2000 R.P.M. infinite variable spindlespeed.

˙38mm. 1-1/2inch hole through spindles.

˙2-point supported spindle using 2precision taper roller bearings.

˙All geared headstock, main gears are made from Chromium, Nickel,molybdenum alloy steel and are case hardened and “REISHAUER" ground.

˙Forced spray lubrication system used forheadstock.

˙High precision ball-screws.

˙Hardened of bed-way & cross ways meetHB 450.

˙Auto lubrication unit for all slide-wayssurface and ball-screws.

˙5HP 3.5KW Main motor or 7.5HP 5.7kw mainservo motor.

HEADSTOCK

˙The headstock is made of high quality cast iron (FC30) all shafts andgears are of high tensile tensil steel and are hardened and ground.

˙3 spindle speeds 30-2000 rpm. Low speed provides High torque output forheavy duty cutting. Hi speed is for finish cutting.

˙Hardened and ground main spindle issupported by precision taper roller bearing.

˙Headstock have inner oil reservoir inwhich lubrication worked by splashing lubricant.

BED WAY

˙Meehanite cast iron bed is heavily ribbed.

˙The bed ways are induction hardened to HS70 and precision ground.

CARRIAGE

˙Automatic lubrication system continuouslysupplies lubricating oil to carriage and cross-slide.

TAILSTOCK

˙Tailstock is of rigid construction andfeatures super tight clamp locked by clamp lever.

˙M.T. #3 barrel internal taper providesheavy support for live centers or tip center.

˙The quill is hardened and ground withinches and metric graduations.

		pElectrical box
pChip tray Easily to remove the chip front of the lathe.	pOPERATOR BOX (OPTIONAL) - Dual hand wheels in front of CNC lathe easily to control in manual mode. - Operator box can move smoothly.	pElectrical box

pElectrical 4 way toolpost (OPTIONAL)	pHydraulic Tailstock	pQuick change tool post

STANDARDACCESSORIES:

1. CNC control system.

2. 3 Jaw chuck 6 inch (165mm) with backplate.

3. Manual Quick change tool post.

4. Steady rest

5. Automatic lubrication system

6. Coolant pump system

7. Electrical hａnd wheel

8. Work lamp

9. Signal lamp

10. Safety guard

11. Toolbox with tools.

12. Center sleeve

13. Two dead centers

14. Camlock spindlewrench.

15. Oil gun

16. Optional manual andpart list

OPTIONALACCESSORIES:

1. 3-jaw strong scroll chuck

2. 4-jaw independent chuck

3. Face plate

4. Follow rest

5. Electrical 4 way tool post

6. Live center M.T.#3.

7. Drilling chuck ½in. (13mm)

8. Hydraulic chuck system 3 jaw 6" chuck

9. Hydraulic tailstock

10. Transformer

11. CE Standard Equipment

BRIEF SPECIFICATION
MODEL		1440NC
NOMINAL SIZE
Swing over Bed		356mm 14in
High of center		176mm 6-7/8in
Swing over Cross Slide		172mm 6.7in
Distance Between Centers		1000mm 40in
Width of Bedways		206mm 8-1/2in
SPINDLE
Number of spindle speeds		3 / 1(Opt.)
Speed range	HI	2000~410 RPM	30-2000RPM Servo motor(Opt.)
	MID	540~110 RPM
	LO	140~30 RPM
Hole through spindle		38mm 1-1/2in
Spindle nose		D1-4 CAMLOCK
Taper of spindle bore		M.T.#5
TAIL STOCK
Total travel of tailstock barrel		100mm 3-15/16in
Taper in tailstock barrel		M.T.#3
Diameter of barrel		Dia. 45mm 1-3/4in
X-axis
Travel		203mm 8in
Rapid travel		6m/min
Ballscrew Dia.		25mm Pitch5
Max servo force		6.3Nm
Z-axis
Travel		840mm 33-1/2in
Rapid travel		8m/min
Ballscrew Dia.		32mm Pitch5
Max servo force		6.3Nm
TOOLPOST
Number of tools		4T
Shank Tool		20 mm
Cutting Distance		800~950mm
ELECTRICAL EQUIPMENT
Main spindle motor		5HP motor 3.5KW /Servo motor 7.5HP 5.7KW(Opt.)
Axis servo motor		Servo motor 1.6HP 1.2KW
Auto lubrication		3L 220V
Coolant pump		1/8HP 220V
PACKING SIZE
SPACE		2070 X 1360 X 1683mm
PACKING SIZE		2300 x 1460 x 2120mm
Machine net weight		1200 kg
Gross weight		1300 kg