滾壓機-無錫振華機械有限公司

參考價	面議

產品簡介

高速數控鏜孔滾壓機采用歐洲*的鏜孔，滾壓復合加工工藝，往復一次即可完成鏜孔滾壓功能。加工精度可達到IT8級，表面粗糙度可達到Ra005-0.2m。該設備與傳統的珩磨機相比具有低噪音、基本無污染的優勢，并可大大節省勞動力成本，加工效率顯著提高。比老的鏜孔+滾壓或鏜孔+珩磨可節省加工時間達80-90%。例：加工180內孔，長度為4米的缸管，從上料裝夾到加工完畢用時僅15分鐘! 而傳統珩磨加工需時......

詳細介紹

TZH型數控鏜削滾壓機主要規格參數列表Main Technical Parameters:

規格型號Model		TZH1020	TZH2030	TZH2530	TZH2060	TZH2560	TZH2090	TZH2590	TZH36120
加工缸筒尺寸Machining Cylinder Dimensions	外徑（mm） Outside Diameter	Φ45~Φ120	Φ60~Φ240	Φ60~Φ300	Φ60~Φ240	Φ60~Φ300	Φ70~Φ240	Φ70~Φ300	Φ145~Φ420
	內徑（mm） Inside Diameter	Φ38~Φ100	Φ50~Φ200	Φ50~Φ250	Φ50~Φ200	Φ50~Φ250	Φ60~Φ200	Φ60~Φ250	Φ125~Φ360
	長度（mm） Length Diameter	600~2000	600~3000		1500~6000		1500~9000		2000~12000
主軸轉速（r/min） Speed of Main Axis		N=100~900							N=100~600
主軸行程（mm） Main Axis The Max. Stroke		About 2400	About 3400		About 6400		About 9400		About 12400
主軸進給速度（m/min） Main Axis Feed Speed		0~3.2
主軸電機功率（KW） Main Axis Power		15	37	45	45	50	45	50	60
液壓系統工作壓力(MPa) Oil Pressure of The Hydraulic System		10
氣動系統供氣壓力(MPa) Pneumatic Supply Gas Pressure		0.7 (氣源或氣泵由需方自備Das resource or pump is provided by buyer)
數控系統CNC System		SIEMENS
電機總功率（KW） Total Power of Motor		About 48	About 86	About 98	About 90	About 108	About 100	About 108	About 140
外形尺寸Oversize(L×W×H)		About 9m×4.5m×2.2m	About 15m×4.5m×2.2m		About 21m×4.5m×2.2m		About 27m×4.5m×2.2m		About 34m×5m×2.4m
設備總重量Total Weight		About17t	About24t	About25t	About30t	About31t	About36t	About37t	About56t

主要適用于液壓缸缸筒內孔的加工。

It is mainly applicable in machining of hydraulic cylinder hole.

采用鏜孔、滾壓復合加工工藝。

It adopts international advanced compound machining technical of boring and rolling.

*的刀具往復一次完成缸內孔加工。

It is perfectly finished within one single to and fro simple movement.

采用西門子控制技術。

The machine adopts siement control system.

精度可達IT8級。

Precision: grade it8.

表面粗糙度可達Ra0.05~0.20。

Surface roughness: Ra0.05~0.20.

加工效率比傳統工藝可提高15-20倍，省時85%。

The machine advances efficiency by 15-20 times compare with traditional processing. It is unbelievable to save time largely around 85%.

如果采用其他規格的產品或?qū)Ξa(chǎn)品有特殊要求，可另行商量。

If products in other specifications or whit special requirement are need, it shall be subject to separate discussion.

TZHD型數控鏜削滾壓機主要規格參數列表Main Technical Parameters:

規格型號Model		TZHD1020	TZHD2030	TZHD2060	TZHD2090
加工缸筒尺寸Machining Cylinder Dimensions	單支工件加工，外徑（mm） When machining one single piece of work-piece, outside diameter	Φ45~Φ168	Φ60~Φ240	Φ60~Φ240	Φ70~Φ240
	兩支或三支工件同時加工，外徑（mm） When machining two or three pieces of work-piece, outside diameter	Φ45~Φ120	Φ60~Φ145	Φ60~Φ145	Φ70~Φ145
	單支工件加工，內徑（mm） When machining one single piece of work-piece, inside diameter	Φ38~Φ140	Φ50~Φ200	Φ50~Φ200	Φ60~Φ200
	兩支或三支工件同時加工，內徑（mm） When machining two or three pieces of work-piece, inside diameter	Φ38~Φ100	Φ50~Φ125	Φ50~Φ125	Φ60~Φ125
	長度（mm）Length Diameter	600~2000	1600~3000	1600~6000	1600~9000
主軸轉速（r/min）Speed of Main Axis		N=100~900
主軸行程（mm）Main Axis The Max. Stroke		About 2400	About 3400	About 6400	About 9400
主軸進給速度（m/min）Main Axis Feed Speed		0~3.2
主軸電機功率（KW）Main Axis Power		37	45	50	50
液壓系統工作壓力(MPa) Oil Pressure of The Hydraulic System		10
氣動系統供氣壓力(MPa) Pneumatic Supply Gas Pressure		0.7 (氣源或氣泵由需方自備Das resource or pump is provided by buyer)
數控系統CNC System		SIEMENS
電機總功率（KW）Total Power of Motor		About 86	About 120	About 126	About 132
外形尺寸Oversize(L×W×H)		About 9m×4.5m×2.6m	About 15m×4.5m×2.6m	About 21m×4.5m×2.6m	About 27m×4.5m×2.6m
設備總重量Total Weight		About 19t	About 26t	About 33t	About 38t

TZHD型數控鏜削滾壓機可適用于同時加工多支工件。

TZHD CN S.R.B machinery is suitable for machining many pieces of work-pieces at one time.

主要適用于大批量液壓缸缸筒內孔的加工。