IC6025 (M20-M35)-IC6025 (M20-M35)-伊斯卡刀具國際貿(mào)易（上海）有限公司

IC6025 (M20-M35)

ISCAR's IC6025 grade covers the ISO application range (M20-35) and is used for roughing and interrupted cuts, as well as applications at medium to low cutting speeds. The IC6025 grade is composed of a cobalt-enriched outer layer substrate, with MT TiCN and alpha Al₂O₃ coating. The unique SUMOTEC CVD post coating treatment was developed for machining stainless steel. IC6025 provides substantially improved tool life, excellent edge performance and repeatability when compared to our current grades and competitor grades.

SUMOTEC CVD Coating Post Treatment

Improved toughness
Improved chipping resistance
Smooth chip flow

Alpha Alumina (Al₂O₃)

Improved crack resistance
High resistance to crater wear
Improved chipping resistance

Intermediate Layer

Improved coating resistance to peeling

TiCN (MT)

Improved flank wear resistance

TiN

Improved adhesion to substrate

Substrate

High toughness

Features
Substrate
Although the coating process of the IC6025 is similar to that of IC6015, it differs with a tougher substrate, featuring a combination of high toughness and deformation resistance.

Coating
The SUMOTEC MTCVD coating adds toughness, flaking and chipping resistance and thus provides very reliable performance.

Applications

Turning stainless steel at moderate cutting speeds
Stable or unstable conditions

Cutting Speed Recommendations

ISO	Material	Condition	Tensile Strength Rm [N/mm2=MPa]	Hardness Material HB No.		PVD Coated			CVD Coated
ISO	Material	Condition	Tensile Strength Rm [N/mm2=MPa]	Hardness Material HB No.		IC807	IC808	IC3028	IC6015	IC6025
M	Stainless steel and cast steel	Ferritic/Martens.	680	200	12	160-250	120-220	60-150	200-300	140-230
		Martensitic	820	240	13	160-250	120-220	60-150	200-300	140-230
		Austenitic	600	180	14	100-200	90-200	50-120	140-250	120-180

The two new grades (IC6015 and IC6025) combined with the new chipformer configuration provide a completely new standard for machining stainless steel.
IC6015 covers the high speed machining area for continuous machining of stainless steel and high temperature alloys, while IC6025 is recommended for the interrupted cut applications.

IC907 / 807 is our first choice for machining S.S.
Developing the family of the 6000 series makes it possible to achieve much better results than IC907/ 807 in machining S.S.