機床商務網
詳細介紹
龍門雙柱式數控鋸床C-1000NC超精密研磨，大型雙柱，增強結構強度的兩列交叉連接。產品詳情請咨詢高聖精密機電股份有限公司，產品規格如有變動不另行通知，請以廠家咨詢信息為準。可給我們詢價留言或者我們。
龍門雙柱式數控鋸床C-1000NC參數詳情：
| Capacity | Round | 1000 mm (39.4") |
Square | 1000 x 1000 mm (39.4” x 39.4") | |
| Saw Blade | Size (LxT) | 9400L x 67W x 1.6T (370" x 2.64" x 0.06") |
| Speed | 15-80 (m/min) (60 Hz) (50-264 ft/min) | |
| Tension | Hydraulic Controlled | |
| Guide | Tungsten Carbide Blade Guide (Hydraulic Clamping Force) | |
| Arm | Hydraulic controlled | |
| Cleaning | Wire brush with flexible drive shaft driven by brush motor | |
| Motor Output | Blade | 15HP (11.25 kw) |
| Hydraulic | 3 HP (2.2 Kw) | |
| Coolant | 1/4HP (0.2 kw) | |
| Feeding | Mode | Hydraulic automatic, NC programmable, 99 steps |
| Single stroke | 500 mm | |
| Multi stroke | Max. 6500 mm (Max. 650”) | |
| Tank Capacity | Hydraulic Oil | 100 Liter |
| Coolant | 120 Liter | |
| Rest piece | 400 mm | |
| Kerf Compensation | Automatic | |
| Vise Control Method | Hydraulic, Full stroke cylinder | |
| Workbed Height | 630 mm (24.8") | |
| Net Weight | 11000kgs | |
| Floor Space (L x W x H) | 2050 x 4400 x 3500 mm | |
C-1000NC Machine Features
Structure
• Oversized precision ground, large dual columns
• Cross link connecting two columns for enhanced structural strength
• 0.5 degree cant to the bed for longer blade life
Blade Drive
• Specially designed gearbox for high lateral pressure
• Inverter controlled infiniy variable blade speed
Blade Guidance & Lubrication System
• Hydraulicallt activated carbide blade guides with bearing guides
• Two addtional guides to support the blade from the top
• Hydraulically actuated guide arm
• Automatic hydraulic blade tensioning device
• Integral coolant system
• Pitch design for coolant drainage
• Independent power driven wire brush system
Control & Automation
• Smart NC-100 PLC technology
• Programmable up to 100 individual cutting jobs with HMI touch screen
• Automatic kerf loss compensation
• Automatic shutoff after cutting jobs complete or when out of stock
• Precision feed pressure & feed rate dual valve system
• Bundle/single cutting mode switch
• Rapid troubleshooting via error feedback system
• Automatic work height selector & air gap eliminator
• Ergonomically located independent control station
Material Feeding & Clamping
• Vises located on opposite sides of the blade
• Full stroke hydraulic front and rear vises
• Double retracting vise jaws
• Automatic multiple indexing up to 6500 mm (650")
• Heavy-duty ductile cast iron vises with replaceable hardend wear plates
• Roller workbed for smooth material feeding
Safety
• Idle wheel motion proximity switch for sensing blade slippage or breakage
• Interlock design in electrical and hydraulic system
• Conduits protection measure
• "Alert Orange" safety measure
Standard Accessories
• Blade "clip" device for easy blade change
• Additional flushing hose
• Bi-metal saw blade
• Beam light
• Tool box, leveling pads, and an additional wire brush
• Operation & parts manual
*All designs and specifications are subject to change without notice or obligation
機床商務網