MV-1375立式加工中心
機械特點

在主軸圓周設氣幕吹凈，防止切削入侵可保證軸承。（選配）
主軸前端環狀橫削，使加工物達到冷卻效果。（選配）
主要機體皆采用箱型結構，保證機體*剛性與穩定性。
熱交換器標準附件，散熱效率佳，可降低故障率及延長內部電子元件的壽命。（選配電控箱空調）
使用鐳射定位儀、循圓切削測試裝置及主軸動平衡校正儀等來保證檢驗，以確保機器動態、靜態與加工精度。
兩側橫削系統搭配螺旋式除屑裝置，可將切削排至前方之橫屑箱內。
滑軌潤滑點平均分配布置，采用容積式配油器，各注射點均等，確保滑動面潤滑均勻。

Air curtain for blowing is set in the spindle circumferenc to prevent cutting invasion and ensure the bearing （optional）.
Ring balance cutting is conducted on the front end of the spondle to achieve the best cooling effect of workpieces （optional）.
Main body is box-structured to ensure the best rigidity and stability.
Heat exchangers are standard accessories,with good heat dissipation efficiency and the ability to reduce intentional rate and to extend the lift of the internal electronic components.（optional electric air conditioning）
Laser positioning system,circular cutting testing fixture and spindle balancing and calibration instrument are used to ensure the inspection as well as the machines dynamic,static and machining precision.
Cutting system on both sides are matched with screw-type chip removal device,and the chips can be removed to the chip removal box in the fornt.
Lubrication points on the slides are evenly distributed,adopting the displacement oil distributor.The injection points are equal to ensure a smooth and even lubrication surface.