高精度機械設計所涉及的機床的性能和精度

為大家介紹一篇關于機床制造的外文，翻譯摘要，說明出處及參考文獻，希望對業內同行有所幫助，另如果需要更多資訊,請登錄成海銑床。
高性能機械加工機床
2009。 PP 219-260
摘要
本章介紹了主要機床的設計，建造和測試方面實現高精度加工零件。不僅機床還加工過程本身是一個錯誤的部分源代碼。因此，一個全面的看法的機加工要求。高精度機械設計所涉及的一些基本原理和方法，提出了進一步深入的研究。一個關鍵的因素是誤差源識別，研究它們的物理原因和zui終的不確定性關聯。因此，裝配誤差，熱生長，構件的變形和控制不的描述。在零部件和組件的錯誤是沿機器運動鏈的傳播，產生較大的位置誤差在刀尖的位置和刀具軸方向。齊次矩陣的使用是一個非常有用的工具，用于估計的誤差傳播。通過切削力引起的撓度變形工具和機器的另一個重要的誤差源。不幸的是，變形是不可能避免的一些模型現在設置加工刀具路徑選擇器，這意味著zui小的切削力誤差敏感方向。施工后，就在機床交付給客戶，精度驗證和性能必須始終執行。描述現有的標準和程序，這是在本章的zui后介紹了。

Aoyama T, Inasaki I (2001) Performances of HSK tool interfaces under high rotational speeds. CIRP Ann Manuf Technol 50:281–284 CrossRef
Arnone M (1998) High performance machining. Cincinnati, USA
Bryan JB (1990) International status of thermal error research. CIRP Ann-Manuf Technol. 39/2:645–656 CrossRef
Chatterjee S (1997) An assessment of quasi-static and operational errors in NC machine tools. J Manuf. Syst, 16:59–68 CrossRef
Dornfeld D, Dae-Eun L (2008) Machine design for precision manufacturing. In: Precision Manufacturing. Springer Verlag, USA
Evans C (1989) Precision Engineering: An Evolutionary View. Cranfield Press, Bedford, UK
Hocken R (Chairman) (1980) Machine tool accuracy, Report of Working Group 1 of the Machine Tool Task Force, UCRL-52960-S. Lawrence Livermore Laboratories, University of California, Livermore, CA
Hsu YY, Wang SS (2007) Mapping geometry errors of five-axis machine tools using decouple method. Int Precis Technol, 1:123–132 CrossRef
Kim GM, Kim BH, Chu CN (2003) Estimation of cutter deflection and form error in ball-end milling processes. Int J Mach Tool Manu 43:917–924 CrossRef
Lamikiz A, López de Lacalle LN, Ocerin O, Diez D, Maidagan E (2008) The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres, Int J Adv Manuf Technol, DOI 10.1007/s00170-007-0956-5
Moriwaki T (1994) Inligent Machine Tool: Perspective and Themes for Future Development. Manuf Sci Eng Trans ASME, 68:841–849
Nakazawa H (1994) Principles of Precision Engineering. Oxford, UK
Nawara L, Kowalski J, Sladek J (1989) The influence of kinematic errors on the profile shapes by means of CMM. CIRP Ann Manuf Technol. 38:511–516 CrossRef
Reshetov DN, Portman VT (1989) Accuracy of Machine Tools. ASME Press Translations
Salgado MA et al. (2005) Evaluation of the stiffness chain on the deflection of end-mills under cutting forces. Int J Mach Tool Manu 45:727–739 CrossRef