機床商務網
詳細介紹
| ||||||
高 精 度 銑 刀 刃 磨 機
| ||||||
| ||||||
主要技術參數 | 英制INCH | 公制MM | ||||
Main Technical Parameter | ||||||
磨削銑刀范圍（柄徑×刀刃直徑×長度） | 2"×9"×10" | 50×225×250mm | ||||
End mill Capacity(Dia of shank×Dia of Edge×Length) | ||||||
工作臺回轉直徑 | 9-3/4" | 245mm | ||||
Swing over table | ||||||
工作臺橫向行程（X軸） | 6" | 150mm | ||||
Longitudinal toale travel (X Axis) | ||||||
工作臺縱向行程（Y軸） | 3" | 75mm | ||||
Cross travel of table (Y Axis) | ||||||
碗形砂輪zui大外形（外徑×厚度×孔徑） | 5"×2"×1-1/4" | 125×50×32mm | ||||
Maximum wheel | ||||||
磨頭角度調整范圍 | +35º -10º | +35º -10º | ||||
Tilt adjutment for wheelhead | ||||||
空氣軸承的回轉角度 | 360º | 360º | ||||
Air bearing swivel | ||||||
空氣軸承的行程 | 10" | 250mm | ||||
Air bearing stroke | ||||||
工作臺zui小進給單位 | 0.001 | 0.02mm | ||||
Table infeed graduation | ||||||
供氣壓力 | 6.3MPa | 6.3MPa | ||||
Air bearing graduation | ||||||
管接頭孔徑 | Z1/4" | Z1/4" | ||||
Pipe joint diameter | ||||||
主軸孔所配彈簧夾頭 | 5C | 5C | ||||
Collet fit for spindle | ||||||
兩工作臺相互移動的平行度 | 0.01/100 | 0.01/100mm | ||||
Parallelism between two tables | ||||||
套筒中心線對工作合移動的平行度 | 0.01/100 | 0.01/100 | ||||
Parallelism of sleeve center line to worktaboe | ||||||
電
機 Motor | 轉速Speed | 3450/2580rpm | 2800rpm | |||
電壓Voltage | 110V/1 Phase | 230V | ||||
功率Power | 1/3HP | 0.25KW | ||||
頻率Frenquecy | 60HZ/50HZ | 50HZ | ||||
特點：磨削順暢，平穩。*的空氣軸承懸浮設計，加壓后主軸轉動靈活自如，摩擦力小，精度高，使用壽命長。可刃磨2，3，4，6槽的高速鋼銑刀，硬質合金銑刀的端刃和螺旋刃。 操作時間：通常情況下，1個13mm直徑的2 槽銑刀可以在2分鐘內完成刃磨（含設定時間）。Feature: Easy to operate, grinding smoothly and steady. Air Bearing construction keeps high accuracy and life long. Applicable to 2,3,4,6 flutes HSS end mill, carbide end mill，reamer. Operation time: Complete in 2 minutes including setup time for 13mm 2 flutes end mill generally. 磨刀機采用開放式的布局結構，嗇了操作窨，加大了磨削范圍，可對銑刀、鉸刀、鉆頭的前角、后角以及刃帶進行磨削，換用不同附件便可磨削球頭銑刀，絲錐等導向刃帶。磨刀機的主要部件采用優質鋁鑄造而成，具有重量輕，吸震抗腐蝕等優點，磨刀器采用了*的氣壓懸浮技術，加壓后的主軸轉動靈活自如，將摩擦降至zui低，大大地增加了其使用壽命. Having opening type structure,adding operation space, enlarging grinding range, this sharpener can grind relief,cutting edge of miller, drill,reamer ,also can grind ball end mill and tap guide cutting edge by changing different attachmentThe main part of shappener is made of excerllent Aluminium it has many features such as light weight,resist rot, etc.it takes up advanced international technique of air floating, the spindle rotate flexibly after being pressed, reduce friction to lowest | ||||||
＊以下特殊附件可以選其一為配機標準配件 | ||||||
高精度銑刀研磨機特殊附件（另購）
| ||||||
空氣軸承AIR BEARING
| ||||||
| ||||||
NO | 主要技術參數Main Technical Parameter | |||||
1 | 空氣軸承筒zui大行程 | 9" | ||||
Max stroke of air bearing sleeve | ||||||
2 | 工作孔所配彈簧夾頭 | 5C | ||||
Collet for workhole | ||||||
3 | 所需工作臺T形槽寬度 | 12.7mm | ||||
T slot of worktable | ||||||
4 | 供氣壓力 | 6.3MPa | ||||
Air consumption | ||||||
5 | 氣管接頭 Pipe joint | Z1/4" | ||||
6 | 回轉角度 | 360° | ||||
Swivel | ||||||
7 | 工作孔中心線對底面的平行度 | 0.001/100mm | ||||
Paralleelim of workhole center line to base surfce | ||||||
8 | 工作孔中心線的徑向跳動（距孔端60mm處） | 0.015mm | ||||
Radius run out of workhole center line(60mm form hole) | ||||||
圓弧修整器RADIUS ATTACHMENT
| ||||||
| ||||||
安裝T形槽寬度 |
12.7mm | |||||
Width of T slot | ||||||
主軸孔所配彈簧夾頭 | 5C | |||||
Collet for spindle hole | ||||||
zui小進給單位 |
0.0005" | |||||
Min infeed | ||||||
zui大磨削圓弧半徑 |
3" | |||||
Max arc radius of grinding | ||||||
分度角度 |
12等分 | |||||
Equal divoion | ||||||
工作孔對底面的平行度 |
0.02/60 | |||||
Parallelism of work hole to base | ||||||
工作孔中心線的跳動（距端面60處） |
0.015 | |||||
Radial run out of work hole center line | ||||||
用于磨削球頭銑刀等，也可與其它工作臺型磨刀機配套使用 It is applicable to grnding balland mill,It can be used with other sharpener of worktable type | ||||||
鉆頭刃磨特殊附件
| ||||||
絲錐刃磨特殊附件 | ||||||
機床商務網