6GK1551-2AA00 6GK1551-2AA00-上海施承電氣自動化有限公司

6GK1551-2AA00 西門子代理商接口網卡 profibus網卡西門子通訊處理器西門子工控通訊網卡西門子工控通訊卡西門子工控通訊主板
西門子工控通訊模塊

_______________________

【SIEMENS】

上海施承電氣自動化有限公司

聯 系人：彭立道（銷售工程師）

______________________________________

II 型 PC 卡（CardBus 32 位），用于將編程器/PC 和帶有 PC 卡插槽的便攜式 PC（CardBus 32 位）連接到 PROFIBUS 和 SIMATIC S7 的 MPI
通訊服務：
- PROFIBUS DP 1 類主機，包括帶有擴展 SOFTNET DP 的非循環式 DP
- PROFIBUS DP 2 類主機，包括帶有擴展 SOFTNET DP 的非循環式 DP
- PROFIBUS DP 從站帶有 SOFTNET DP 從站
- 編程器/OP 通訊
- S7 與 SOFTNET-S7 的通訊
- 通過 SOFTNET-DP 或 SOFTNET-S7 進行開放式通訊（基于 FDL 接口的發送/接收）
可用于：
- STEP 7 和 NCM PC；（ProTool、Micro/Win、ProTool/Pro、SIMATIC PDM，用于編程器/OP 通訊）
- SOFTNET-S7 (用于 S7 通訊)
- SOFTNET DP，SOFTNET DP 從站（用于 DP）
相應的OPC服務器包含在在通訊軟件的供貨范圍內

Benefits

將筆記本電腦或者其它便攜式 PC 連接到 PROFIBUS 上（例如，用于診斷和調試）
安裝和調試都十分簡單
用作 SOFTNET 的優化
OPC 作為標準接口
具有 NCM PC 和 STEP 7 的統一程序和組態功能

Area of application

CP 5512 能將具有 PC 卡插槽（CardBus 32 位）的編程器和便攜式工控機連接到 PROFIBUS 和 SIMATIC S7 的 MPI 多點接口。

Design

用于 Cardbus (32 位) 的 PC 卡 II 型
用于連接 PROFIBUS 的帶 9 針 D 型連接器的適配器

Functions

CP 5512 可在不同的軟件包下進行操作，并允許用戶通過 PROFI-BUS 和多點接口(MPI)執行編程設備的功能和 PC 函數。

每臺 PG/PC/筆記本電腦上只能使用一個 CP。每個CP 只能使用一個相同的協議 (PROFIBUS DP， S7 通信或者 FDL)。

下面的軟件包支持 CP 5512：

STEP 7 V5.2 and higher;
drivers for the CP 5512 that execute under Windows 2000 Professional and XP Professional are included in the scope of supply of STEP 7.
SOFTNET-S7 V6.1 and higher;
with this package, the S7 programming interface under Windows XP Professional can be used (Windows 2000 Professional from SOFTNET-S7 V6.1 SP1 upwards).
SOFTNET-DP V6.1 and higher;
the CP 5512 can be used as a PROFIBUS DP Master Class 1 or 2 under Windows XP Professional (Windows 2000 Professional from SOFTNET-DP V6.1 SP1 upwards).
SOFTNET-DP slave V6.1 and higher;
for using the CP 5512 as a PROFIBUS DP slave under Windows XP Professional (Windows 2000 Professional from SOFTNET-DP slave V6.1 SP1 upwards).
STEP 7-Micro/WIN V3.2 SP4 and higher;
hardware basis for the programming software of the SIMATIC S7-200 programmable controller.
ProTool, ProTool/Pro V6.0 SP2;
the CP 5512 can be used as a hardware basis for the configuration tool for SIMATIC Operator Panels, Touch Panels and Text Displays.
NCM PC V5.2 and higher;
under Windows XP Professional
SIMATIC PDM;
drivers for the CP 5512 that execute under Windows 2000 Professional and XP Professional are included in the scope of supply of SIMATIC PDM.

Technical Specifications

Order number		6GK1551-2AA00
Product type designation		CP 5512
Transmission rate
Transfer rate
● at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of electrical connections
● at the 1st interface acc. to PROFIBUS		1
Type of electrical connection
● at the 1st interface acc. to PROFIBUS		9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage
● 1 from backplane bus		3.3 V
Relative symmetrical tolerance for DC
● at 3.3 V		5 %
Consumed current
● 1 from backplane bus for DC maximum		0.52 A
Active power loss		1.8 W
Permitted ambient conditions
Ambient temperature
● during operation		5 ... 45 °C
● during storage		-20 ... +60 °C
● during transport		-20 ... +60 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP00
Design, dimensions and weight
Module format		PC card Type II CardBus (32 bit)
Width		86 mm
Height		5 mm
Depth		54 mm
Net weight		130 g
Number of plug-in cards of same design plug-in per PC station		1
Number of units Note		-
Performance data
Performance data open communication
Software for open communication by means of SEND/RECEIVE required		Yes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB S7
Number of possible connections for open communication by means of SEND/RECEIVE maximum		50
Performance data PROFIBUS DP
Software for DP master function required		Yes, SOFTNET-PB DP
Service as DP master
● DPV0		Yes
● DPV1		No
● DPV2		No
Number of DP slaves on DP master usable		64
Amount of data
● of the address area of the inputs as DP master total		7 808 byte
● of the address area of the outputs as DP master total		7 808 byte
● of the address area of the inputs per DP slave		244 byte
● of the address area of the outputs per DP slave		244 byte
● of the address area of the diagnostic data per DP slave		244 byte
Software for DP slave function required		Yes, SOFTNET-PB DP slave
Service as DP slave
● DPV0		Yes
● DPV1		No
Amount of data
● of the address area of the inputs as DP slave total		122 byte
● of the address area of the outputs as DP slave total		122 byte
Performance data S7 communication
Software for S7 communication required		Yes, SOFTNET-PB S7
Number of possible connections for S7/PG communication maximum		8
Performance data multi-protocol mode
Number of configurable connections per PC station		207
Product functions management, configuration
Configuration software required		Included in the scope of delivery of the required software product
Product functions Diagnosis
Product function
● Port diagnostics		Yes
Standards, specifications, approvals
Standard
● for EMC		2004/108/EC
● for safety from CSA and UL		CAN/CSA C22.2 & UL 60950-1
● for emitted interference		EN 61000-6-3, EN 61000-6-4
● for interference immunity		EN 61000-6-1, EN 61000-6-2
Certificate of suitability
● CE marking		Yes
● C-Tick		Yes