機床商務網
詳細介紹
| MODEL | DY-1000C | DY-1100C | |||||
|---|---|---|---|---|---|---|---|
| Machining capability | Distance between centers (mm) | 2000/3000/4000/5000/6000/7000/8000/9000/10000/11000/~30000 | |||||
| Swing over bed | 1000mm | 1100mm | |||||
| Swing over carriage | 660mm | 760mm | |||||
| Bed | Width | 1040mm | |||||
| Main spindle | Spindle nose | D1-11, 130mm, L 40-130, M 130-400, H 400-1200rpm A2-11, 165mm, L 20-110, M 110-320, H 320-660rpm A2-15, 230mm, L 20-110, M 110-320, H 320-660rpm A2-20, 310mm, L 20-100, M 100-200, H 200-400rpm | |||||
| Spindle bore | |||||||
| Spindle speed (rpm) | |||||||
| Travel | Cross travel (X axis) | 520mm | 550mm | ||||
| Longitudinal travel (Z axis) | Same as distance between centers | ||||||
| Feeds | X axis rapid traverse | 5M/min | |||||
| Z axis rapid traverse | 5M/min | ||||||
| Cutting feed rate | 0.001-500mm/rev (0.0004”-20”/rev) | ||||||
| Motors | Main motor | Fanuc or Siemens spindle motor 22kw | |||||
| Inverter | --- | ||||||
| X axis servo motor | Fanuc or Siemens servo motor 2.49kw/11.9Nm | ||||||
| Z axis servo motor | Fanuc or Siemens servo motor 8.31kw/39.7Nm | ||||||
| Oil pump | 80W | ||||||
| Coolant pump | 450W, 6~10bar | ||||||
| Hydraulic tank pump (optional) | 3hp (2.2kw) | ||||||
| Tank capacity | Hydraulic tank (optional) | 20L | |||||
| Lubrication pump | 8L | ||||||
| Ball screw | X axis diameter | 40mm, pitch 10 | |||||
| Z axis diameter | 1000~6000: 63mm / 7000~8000: 80mm / 9000~: gear rack | ||||||
| Tailstock | Quill diameter | 115mm (sta.) / 160mm (opt.) / 250mm (opt.) | |||||
| Quill travel | 270mm | ||||||
| Quill taper | MT6 | ||||||
| Length (mm) | 5280 / 6280 / 7280 / 8280 / 9280 / 10280 / 11280 /12280 / 13280 / 14280 ~ mm | ||||||
| Width (mm) | 3140 mm | ||||||
| Height (mm) | 2530 mm | ||||||
| N.W. (kg) | 12500 / 14900 / 17300 / 19800 / 22400 / 24800 / 27200 / 29600 / 31900 / 34300 ~ | ||||||
| Weight capacity | Chuck only | Chuck + Tailstock | Chuck + 1 Steady rest + Tailstock | Chuck + 2 Steady rest + Tailstock | |||
|---|---|---|---|---|---|---|---|
| Spindle bore 130mm | 1000kg | 4500kg | 6500kg | 7500kg | |||
| Spindle bore 160mm | 1500kg | 5000kg | 7000kg | 8000kg | |||
| Spindle bore 230mm | 1500kg | 5500kg | 7500kg | 8500kg | |||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | |||||||
機床商務網