DCM-21/24/28/32/36/42-龍門加工中心機(jī)-優(yōu)岡股份有限公司

參考價(jià)	面議

詳細(xì)介紹

Description	DCM 21 Series
Description	2132	2142	2152
Table
Length	3000 mm (118.1")	4000 mm (157.4")	5000 mm (196.8")
Width	1800 mm (70.8")
T-Slot (W x P x N)	22 mm x 150 mm x 13 (0.86" x 5.9" x 13)
Maximum load	15000 kgs	18000 kgs	20000 kgs
Travel
Longitudinal travel(X axis)	3200 mm (126")	4200 mm (165.3")	5200 mm (204.7")
Cross travel (Y axis)	2100 mm (82.6")
Vertical travel (Z axis)	800 mm (31.5") / 1100 mm (43.3") (opt)
Distance from spindle end to table	180~900 mm (7" ~ 38.6")	75 ~ 875 mm (2.95" ~ 34.4")
Distance from spindle center to column	430 mm (16.9")
Distance between columns	2150 mm (86.4")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	18000 mm/min	15000 mm/min
Rapid traverse (X/Y/Z)	18 / 20 / 15	15 / 20 / 15	12 / 20 / 15
ATC
Tool storage capacity	24 tools
Tool size	Dia. 110 mm (4.3”)
Max. tool size	Dia. 200 mm (7.8”)
Max. tool length	380 mm (14.9")
Max. tool weight	18 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	40 ~ 50 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	8400 mm (331”)	11100 mm (437”)	13100 mm (515.7”)
Machine size width	4850 mm (191”)
Machine size height	4570 mm (180”) / 5470 mm (215.3”)
Machine weight	29 ton	33 ton	37 ton

*The Specifications are subject to change without prior notice.

Description	DCM 24 Series
Description	2432A	2442A	2452A
Table
Length	3000 mm (118.1")	4000 mm (157.4")	5000 mm (196.8")
Width	2000 mm (78.7")
T-Slot (W x P x N)	22 mm x 150 mm x 13 (0.86" x 5.9" x 13)
Maximum load	15000 kgs	18000 kgs	20000 kgs
Travel
Longitudinal travel(X axis)	3200 mm (126")	4200 mm (165.3")	5200 mm (204.7")
Cross travel (Y axis)	2400 mm (94.5")
Vertical travel (Z axis)	800 mm (31.5") / 1100 mm (43.3") (opt)
Distance from spindle end to table	130 ~ 930 mm (5.1" ~ 36.6")	75 ~ 875 mm (2.95" ~ 34.4")
Distance from spindle center to column	430 mm (16.9")
Distance between columns	2450 mm (96.5")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	15000 mm/min
Rapid traverse (X/Y/Z)	18 / 20 / 15	15 / 20 / 15	12 / 20 / 15
ATC
Tool storage capacity	24 tools
Tool size	Dia. 110 mm (4.3")
Max. tool size	Dia. 200 mm (7.8")
Max. tool length	380 mm (14.9")
Max. tool weight	18 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	40 ~ 50 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	8400 mm (331”)	11100 mm (437”)	13100 mm (515.7”)
Machine size width	5150 mm (202.8”)
Machine size height	4570 mm (180”) / 5470 mm (215.3”)
Machine weight	30 ton	35 ton	40 ton

*The Specifications are subject to change without prior notice.

Description	DCM 28 Series
Description	2832	2842	2852	2860
Table
Length	3000 mm (118.1")	4000 mm (157.4")	5000 mm (196.8")	6000 mm (236.2")
Width	2200 mm (86.6")
T-Slot (W x P x N)	28 mm x 180 mm x 13 (1.1" x 7" x 13)
Maximum load	18000 kgs	20000 kgs	22000 kgs	24000 kgs
Travel
Longitudinal travel(X axis)	3200 mm (126")	4200 mm (165.3")	5200 mm (204.7")	6000 mm (236.2")
Cross travel (Y axis)	2800 mm (110.2")
Vertical travel (Z axis)	1100 mm (43.3") / 1400 mm (55.1") (opt)
Distance from spindle end to table	180 ~ 1280 mm (7" ~ 50.4")
Distance from spindle center to column	430 mm (16.9")
Distance between columns	2850 mm (112.2")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	12000 mm/min
Rapid traverse (X/Y/Z)	15 / 15 / 15	12 / 15 / 15	10 / 15 / 15	10 / 15 / 15
ATC
Tool storage capacity	32 tools
Tool size	Dia. 125 mm (4.9")
Max. tool size	Dia. 220 mm (8.6")
Max. tool length	400 mm (15.7")
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	9400 mm (370”)	11400 mm (449”)	13400 mm (528”)	15400 mm (607”)
Machine size width	6000 mm (236”)
Machine size height	5200 mm (216.5”) / 6100 mm (240.1”)
Machine weight	44 ton	49 ton	54 ton	59 ton

*The Specifications are subject to change without prior notice.

Description	DCM 32 Series
Description	3232	3242	3252	3260
Table
Length	3000 mm (118.1")	4000 mm (157.4")	5000 mm (196.8")	6000 mm (236.2")
Width	2600 mm (102.3")
T-Slot (W x P x N)	28 mm x 200 mm x 13 (1.1" x 7.8 " x 13)
Maximum load	18000 kgs	20000 kgs	22000 kgs	24000 kgs
Travel
Longitudinal travel(X axis)	3200 mm (126")	4200 mm (165.3")	5200 mm (204.7")	6000 mm (236.2")
Cross travel (Y axis)	3200 mm (126")
Vertical travel (Z axis)	1100 mm (43.3") / 1400 mm (55.1") (opt)
Distance from spindle end to table	150 ~ 1250 mm (5.9" ~ 49.2")
Distance from spindle center to column	430 mm (16.9")
Distance between columns	3250 mm (128")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	12000 mm/min
Rapid traverse (X/Y/Z)	15 / 15 / 15	12 / 15 / 15	10 / 15 / 15	10 / 15 / 15
ATC
Tool storage capacity	32 tools
Tool size	Dia. 125 mm (4.9")
Max. tool size	Dia. 220 mm (8.6")
Max. tool length	400 mm (15.7")
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	9400 mm (370”)	11400 mm (449”)	13400 mm (528”)	15400 mm (607”)
Machine size width	6400 mm (252”)
Machine size height	5200 mm (216.5”) / 6100 mm (240.1”)
Machine weight	50 ton	55 ton	60 ton	65 ton

*The Specifications are subject to change without prior notice.

Description	DCM 36 Series
Description	3642	3652	3660
Table
Length	4000 mm (157.4")	5000 mm (196.8")	6000 mm (236.2")
Width	3000 mm (118.1”)
T-Slot (W x P x N)	28 mm x 200 mm x 15 (1.1" x 7.8 " x 15)
Maximum load	20000 kgs	22000 kgs	24000 kgs
Travel
Longitudinal travel(X axis)	4200 mm (165.3")	5200 mm (204.7")	6000 mm (236.2)
Cross travel (Y axis)	3600 mm (141.7")
Vertical travel (Z axis)	1100mm (43.3”) / 1400 mm (55.1”) (OPT.) / 1500 mm (59”) (opt.)
Distance from spindle end to table	260 ~ 1360 mm / 250 ~ 1750 mm (opt) 10.2" ~ 53.5" / 9.84" ~ 68.9" (opt)
Distance from spindle center to column	470 mm (18.5")
Distance between columns	3650 mm (143.7")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	10000 mm/min
Rapid traverse (X/Y/Z)	12 / 12 / 15	10 / 12 / 15	10 / 12 / 15
ATC
Tool storage capacity	32 tools
Tool size	Dia. 125 mm (4.9")
Max. tool size	Dia. 220 mm (8.6")
Max. tool length	400 mm (15.7")
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	11400 mm (449”)	13400 mm (528”)	15400 mm (607”)
Machine size width	6800 mm (268”)
Machine size height	5500 mm (216.5”) / 6450 mm 253.9”)
Machine weight	62 ton	67 ton	72 ton

*The Specifications are subject to change without prior notice.

Description	DCM 42 Series
Description	4242	4252	4260
Table
Length	4000 mm (157.4")	5000 mm (196.8")	6000 mm (236.2")
Width	3000 mm (118.1”)
T-Slot (W x P x N)	28 mm x 200 mm x 15 (1.1" x 7.8 " x 15)
Maximum load	22000 kgs	24000 kgs	26000 kgs
Travel
Longitudinal travel(X axis)	4200 mm (165.3")	5200 mm (204.7")	6000 mm (236.2)
Cross travel (Y axis)	4200 mm (165.4”)
Vertical travel (Z axis)	1100mm (43.3”) / 1400 mm (55.1”) (OPT.) / 1500 mm (59”) (opt)
Distance from spindle end to table	260 ~ 1360 mm / 250 ~ 1750 mm (opt) 10.2" ~ 53.5" / 9.84" ~ 68.9" (opt)
Distance from spindle center to column	470 mm (18.5")
Distance between columns	4250 mm (167.3")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	10000 mm/min
Rapid traverse (X/Y/Z)	12 / 12 / 15	10 / 12 / 15	10 / 12 / 15
ATC
Tool storage capacity	32 tools
Tool size	Dia. 125 mm (4.9")
Max. tool size	Dia. 220 mm (8.6")
Max. tool length	400 mm (15.7")
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	11400 mm (449”)	13400 mm (528”)	15400 mm (607”)
Machine size width	7400 mm (291.3”)
Machine size height	5500 mm (216.5”) / 6450 mm 253.9”)
Machine weight	68 ton	73 ton	78 ton

*The Specifications are subject to change without prior notice.

Description	DCM 48 Series
Description	4852	4860
Table
Length	5000 mm (196.8")	6000 mm (236.2")
Width	3000 mm (118.1")
T-Slot (W x P x N)	28 mm x 200 mm x 17 (1.1" x 7.8 " x 17)
Maximum load	24000 kgs	26000 kgs
Travel
Longitudinal travel(X axis)	5200 mm (204.7")	6000 mm (236.2)
Cross travel (Y axis)	4800 mm (189")
Vertical travel (Z axis)	1100mm (43.3”) / 1400 mm (55.1”) (OPT.) / 1500 mm (59”) (opt)
Distance from spindle end to table	260 ~ 1360 mm / 250 ~ 1750 mm (opt) 10.2" ~ 53.5" / 9.84" ~ 68.9" (opt)
Distance from spindle center to column	470 mm (18.5")
Distance between columns	4850 mm (190.9")
Spindle
Spindle drive motor (Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speed	6000 rpm
Spindle taper	BT50
Feed
Cutting feedrate	10000 mm/min
Rapid traverse (X/Y/Z)	10 / 12 / 15	10 / 12 / 15
ATC
Tool storage capacity	32 tools
Tool size	Dia. 125 mm (4.9")
Max. tool size	Dia. 220 mm (8.6")
Max. tool length	400 mm (15.7")
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45?
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm²
Machine size length	13400 mm (528”)	15400 mm (607”)
Machine size width	8000 mm (315”)
Machine size height	5500 mm (216.5”) / 6450 mm 253.9”)
Machine weight	75 ton	80 ton

*The Specifications are subject to change without prior notice.

DCM Series Feature

Excellent structural rigidityCast iron components use FEA (Finite Element Analysis) to optimize rigidity and anti-vibration properties. Prevents cutting resonance, prolongs tool life and increases work piece accuracy and production capabilities.
Optimized spindle boxOptimized design, rectangular ratio 1:1.125 provides rigid Z axis travel. Spindle box interior has rib reinforcements to increase cutting and feeding rigidity and stability.
Optimized Z axis balance systemTwin N2 tank counter-balance loop design. Driver set firmly attached to Z axis. Provides precision response to servo motor and high thrust machining requirements on Z axis.
Optimized feeding systemX, Y, Z axes are coupled with heavy duty, high precision class P linear guideways, with 0.003-0.005 mm low friction, low viscosity, optimizes high driven sensitivity and increases great dynamic accuracy.
Optimized feed structure systemThree axes coupled with class C3 precision ball screws. Properly pretension from the ends to reduce thermal displacement. Absolute value coordinate system eliminates structural complexity. Ballscrews are specially designed with anti-ram protection devices on the ends. Powerful spindle, high cutting capabilities.
Powerful spindle, high cutting capabilitiesThe BT50 spindle, diameter 100mm, coupled with class P4 precision angular bearings reaches 6000rpm. High torque spindle motor with 1:4 precision high/low speed gear box satisfies cutting requirements in all fields with sufficient horse power and torque.

Floor Space

Model	2132	2142	2152	2432A	2442A	2452A	2832	2842	2852	2860	3232	3242	3252	3260	3642	3652	3660	4242	4252	4260
A	2950			3250			4060				4460				4850			5450
B	4850	4210		4850	4510		5990				6390				8260			6950
C	4450	4550		4450	4550		5450				5450				5685			5750
D	6190	8200	10200	6190	8200	10200	6200	8200	10200	11900	6190	8200	10200	11900	8200	10200	11900	8190	10192	11800
E	8850	11100	13100	8850	11100	13100	9200	11200	13200	14600	8500	11200	13200	14600	11200	13200	14600	11350	13350	15200
F	3000	4000	5000	3000	4000	5000	3000	4000	5000	6000	3000	4000	5000	6000	4000	5000	6000	4000	5000	6000
G	1800			2000			2200				2600				3000			3000
H	150	250		250			180				180				200			200

High Rigidity Structure

Crossbem

High rigidity, extra wide, box type , stair style structural design optimizes Y and Z axes static rigidity and dynamic precision.

Work Table

Unique double deck enclosed structure design coupled with extensive high rigidity "HGH" linear guideways to carry heavy duty work pieces. Provides high rigidity and stability, smooth motion and low friction.

Base

The rigid box structure with one piece thick walled and ribbed design chip trough (DCM 21 series); three linear guideways (DCM 28~ 42 series); reinforced extra wide doorway and high rigidity and dynamic accuracy.

Spindle Box

Optimized design, rectangular ratio 1:1.125. Spindle box interior has rib reinforcements, coupled with heavy duty "RGH" linear guideway to increase cutting and feeding rigidity and stability.

Slideway Bracket

Unique sideway design, there are four "HGH" ballscrew slide blocks on the lower sideway, and three on the upper sideway are coupled with stair style support. Ensure high strength and stability.

Ballscrews and Bearing Base

X, Y, Z axes coupled with class C3 precision ballscrews reduce thermal displacement, Ballscrew ends are pretensioned and specially designed with anti-ram to protect machine in case of programming error cause over travel.

Vertical Column

Box-in-box reinforced column structural design replaces conventional hollow design, enhanced anti-pressure and anti-vibration.

Reinforced Ribs

Extra wide and thick ribs reinforce base rigidity, absorb vibration and resist curving. One piece design for chip removal trough.

Dimension

DCMS	2460	2470	2480	2490	24100	24110	2860	2870	2880	2890	28100	28110	3260	3270	3280	3290	32100	32110	3660	3670	3680	3690	36100	36110	4260	4270	4280	4290	42100	42110	4860	4870	4880	4890	48100	48110	5460	5470	5480	5490	54100	54110
A	3850						4250						4650						5050						5650						6250						6850
B	8060	9060	10060	11120	12120	13120	8060	9060	10060	11120	12120	13120	8060	9060	10060	11120	12120	13120	8060	9060	10060	11120	12120	13120	8060	9060	10060	11120	12120	13120	8060	9060	10060	11120	12120	13120	8060	9060	10060	11120	12120	13120
C	11060	12060	13060	14160	15120	16120	11060	12060	13060	14160	15120	16120	11060	12060	13060	14160	15120	16120	11060	12060	13060	14160	15120	16120	11060	12060	13060	14160	15120	16120	11060	12060	13060	14160	15120	16120	11060	12060	13060	14160	15120	16120
D	5120
E	220						320						320						320						320						320						320
F	2000						2200						2600						3000						3600						4200						4600

Quality Assured

Slide block length coverage about 80% provides strong support, excellent dynamic rigidity.

Accumulator Closed Loop Balance System Dual nitrogen tanks balance system, tank pressure and spindle head achieve automatic balancing.

Precision hａnd scraping replaces spacers in column and horizontal beam, increases strength and rigidity.

Long screw multi-point supported by complete enclosed pneumatic loop. Pressure difference + 0.05kg/cm² straightness. per 1.5m maintains screw straightness.

Hａnd scraped base increases precision and rigidity of the column and base.

DCMS series, 100 mm interval between column slide blocks. Double lined design optimized moving accuracy.

Ensured Accuracy

Whole series precision laser calibrated for straightness and surface roughness.

Spindle Horsepower and Torque Graphs

Powerful Cutting Capabilities

High Efficiency Spindle

Spindle uses class P4 angular contact bearings, exterior with oil coolant recycling, prevents thermal deformation of spindle.

Two Speed Gear Box

Spindle uses ZF DUOPLAN two speed gearbox (1:4). High torque, high efficiency, low noise, fully enclosed / lubricated speed change gearbox.

Surface Milling

Dia. 150 mm, 350 rpm, t = 8mm / 400 mm/min. SP load 70% / X load 28%, S45C RMS12s

Drilling

Dia. 48 mm, 1200 rpm, S45C / 30 mm/min Z load 80% / tolerance +0.1 mm

Options (Milling Head)

Main Feature

"π " Type horizontal beam; Y axis travel increased by 650 mm, allows for larger work pieces. (Option)

Spindle motor attached to top of spindle head; assists deep hole machining for large work pieces, and effectively protects spindle from thermal displacement.