機床商務網(wǎng)
詳細介紹
| Description | TK 1200N | TK 1400N | TK 1600N |
| Capacity | |||
| Swing over bed | 1190 mm (46.8") | 1385 mm (54.5") | 1580 mm (62.2") |
| Swing over cross slide | 830 mm (32.6") | 1030 mm (40.5") | 1230 mm (48.4") |
| Swing over gap | 1750 mm (68.8") | 1950 mm (76.7") | 2150 mm (84.6") |
| Center height | 600 mm (23.6") | 700 mm (27.5 ") | 800 mm (31.4") |
| Width of gap | 600 mm (23.6") | ||
| Bed width / Auxiliary guide | 800 mm (31.4") / 1000 mm (39.3") | ||
| Between centers | 2M, 3M, 4M, 5M, 6M, 7M, 8M, 9M, 10M, 11M, 12M, 13M, 14M | ||
| Headstock | |||
| Spindle bore,dia. | Ø 230 mm (9") [Opt. 310 mm (12"), Ø 360 mm (14"), Ø 535 mm (21")] | ||
| Spindle nose | A2-15 [Opt. A2-20, A2-28] | ||
| Spindle speeds (rpm), 12steps | 6-400 [Opt. 5-300, 3-230] | ||
| Main spindle motor | 30HP [Opt. 40HP or 50HP] | ||
| Feed and Threads | |||
| Cross travel | 780 mm (30.7") | ||
| Cross feeds | 0.065-0.96 mm / rev (48 kinds) | ||
| Longitudinal feeds | 0.13-1.92 mm / rev (48 kinds) | ||
| Lead screw diameter | 50 mm (1.9") x 2 TPI | ||
| Threading range, Metric | 2-30 mm / pitch (44 kinds) | ||
| Threading range, Inch | 1-15 TPI (48 kinds) | ||
| Module pitch threads | 1-15 M (32 kinds) | ||
| DP. Pitch threads | 2-30 P (48 kinds) | ||
| Compound rest travel | 320 mm (12.6") | ||
| Tool size | 50 x 50 mm (2 x 2") | ||
| Rapid motor | 1 HP | ||
| Tailstock | |||
| Quill Diameter | Ø 200 mm (7.87") [Opt. Ø 290 mm (11.41") rotating type] | ||
| Center taper | MT7 | ||
| Quill travel | 300 mm (11.8") | ||
*The Specifications are subject to change without prior notice.
Copy device with 120mm stroke length
Semi-automatic rapid threading attachment
Heavy duty cast iron tailstock body
MT6 taper quill movement by 2 speed reduction box and handwheel
Heavy duty taper attachment
TK1600N x 4000
Standard Accessories
- Inch/metric dual gear box
- 4-ways toolpost with T slot
- Work light
- Coolant system
- Thread chasing dial
- Cross & longitudinal rapid travel
- Longitudinal bar with travel dogs (for carriage stop)
- Magnetic brake for main spindle
- Sleeve & centers
- Tool box with tools
- Manual
Options
- Upgrade spindle bore
- Upgrade spindle motor
- Chuck or Face plate
- Adaptor for rear chuck
- Front chuck protection cover
- Rear chuck protection cover
- 4-position carriage stop
- Steady rest
- Follow rest
- Rear tool post
- Quick change tool post
- Boring bar tool holder
- Rapid threading attachment
- Auto feed on top slide
- Copy attachment (stroke 120mm)
- Taper attachment (±10 degree, stroke 500mm)
- Rotating center, MT7
- Full length rear splash guard (BC. 2M-5M)
- Movable rear splash guard
- CE mark
機床商務網(wǎng)