詳細介紹
Description | TNC-N200DS | TNC-N200DS-B | TNC-N200DST | TNC-N200DST-B |
Capacity | ||||
Swing over bed | Ø 600 mm (23.6") | Ø 650 mm (25.6") | Ø 620 mm (24.4") | |
Max. machining diameter | Ø 245 mm (9.6") | Ø 490 mm (19.3") | Ø 440 mm (17.3") | |
Max. machining length | Ø 260 mm (10.2") | Ø 500 mm (19.7") | Ø 310 mm (12.2") | Ø 290 mm (11.4") |
Main Spindle(L) | ||||
Spindle nose | A2-5 | A2-6 | A2-5 | A2-6 |
Spindle bore | Ø 56 mm (2.2") | Ø 61 mm (2.4") | Ø 56 mm (2.2") | Ø 61 mm (2.4") |
Bar capacity | Ø 45 mm (1.8") | Ø 51 mm (2") | Ø 45 mm (1.8") | Ø 51 mm (2") |
Spindle bearing (ID) | Ø 90 mm (3.5") | Ø 100 mm (3.9") | Ø 90 mm (3.5") | Ø 100 mm (3.9") |
Hydraulic chuck | Ø 169 mm (6.7") | Ø 210 mm (8.3") | Ø 169 mm (6.7") | Ø 210 mm (8.3") |
Speed range | 60-6000 rpm | 42-4200 rpm | 60-6000 rpm | 42-4200 rpm |
Sub Spindle (R) | ||||
Spindle nose | A2-5 | |||
Spindle bore | Ø 56 mm (2.2") | |||
Bar capacity | Ø 45 mm (1.8") | |||
Spindle bearing (ID) | Ø 90 mm (3.5") | |||
Hydraulic chuck | Ø 169 mm (6.7") | |||
Speed range | 60-6000 rpm | |||
B stroke | 260 mm (10.2") | 500 mm (19.7") | 520 mm (20.5") | 500 mm (19.7") |
B axis rapid travel | 20 M/min. | |||
Turret | ||||
Tool number | 12 Stations (Servo turret) | L: 12, R: 12 (Servo turret) | ||
X axis stroke: X1 | 165 mm (6.5") | 280 mm (11") | L: 245 mm (9.6") | L: 245 mm (9.6") |
X axis stroke: X2 | - | R: 245 mm (9.6") | R: 245 mm (9.6") | |
Z axis stroke: Z1 | 310 mm (12.2") | 560 mm (22") | L: 342 mm (13.5") | L: 342 mm (13.5") |
Z axis stroke: Z2 | - | R: 342 mm (13.5") | R: 342 mm (13.5") | |
Rapid travel: X1, X2 | 30 M/min (1181 ipm) | 20 M/min (787 ipm) | ||
Rapid travel: Z1, Z2 | 30 M/min (1181 ipm) | 20 M/min (787 ipm) | ||
Tool change time | 0.2 sec. | L & R: 0.2 sec | ||
Tool holder | VDI 30, □ 20 mm | L & R: VDI 30, □ 20 mm | ||
Max. boring bar | Ø 32 mm (1.3") | L & R: Ø 32 mm (1.3") |
*The Specifications are subject to change without prior notice.
Description | TNC-N200 | TNC-N250 | TNC-N300 | |
Capacity | ||||
Swing over bed | Ø 480 mm (18.9") | Ø 600 mm (23.6") | Ø 630 mm (24.8") | |
Max. machining diameter | Ø 280 mm (11") | Ø 330 mm (13") | Ø 442 mm (17.4") | |
Max. machining length | Ø 462 / 700 / 1000 mm (18.2" / 27.6" / 39.4") | Ø 430 / 740 / 1000 mm (16.9" / 29.1" / 39.4") | Ø 700 / 1000 mm (27.6" / 39.4") | |
Spindle | ||||
Spindle nose | A2-6 | A2-8 | ||
Spindle bore | Ø 61 mm (2.4") | Ø 77 mm (3") | Ø 90 mm (3.5") | |
Bar capacity | Ø 51 mm (2") | Ø 65 mm (2.6") | Ø 77 mm (3") | |
Spindle speed | 40-4000 rpm | 40-3500 rpm | 35-3500 rpm OPT: 25-2500 rpm | |
Living tools speed | 25-4000 rpm | 25-4000 rpm | 25-4000 rpm | |
Spindle taper | 1:20 | |||
Hydraulic chuck | Ø 210 mm (8.3") | Ø 254 mm (10") OPT: Ø 304 mm (12") | ||
Turret | ||||
Tool station | Hyd. 12-160 OPT: V12 Servo 12-240 | |||
O.D. tooling | □ 20 x 20 mm (OPT: □ 25 x 25 mm) | □ 25 x 25 mm | ||
I.D. tooling | Dia. 32 mm (1.3") OPT: Dia. 40 mm (1.6") | Dia. 40 mm (1.6") | ||
Z travel | 475 / 700 / 1000 (18.7" / 27.6" / 39.4") | 460 / 700 / 1000 (18.1" / 27.6" / 39.4") | 700 / 1000 (27.6" / 39.4") | |
X travel | 142 mm (5.6") | 180 mm (7.1") | 250 mm (9.8") | |
Rapid travel (X, Z-axis) | 30 M/min (1181 rpm) | |||
Cutting feed rate (Both-axis) | 0.001-500 mm/rev | |||
Dia. of ball screw (Z-axis) | Ø 36 mm (1.41") P10 | |||
Dia. of ball screw (X-axis) | Ø 32 mm (1.26") P10 | |||
Tailstock | ||||
Quill diameter | Ø 75 mm (3") | Ø 90 mm (3.5") | ||
Quill stroke | 80 mm (3.2") | 100 mm (4") | ||
Quill taper | MT No.4 | MT No.5 | ||
Tailstock stroke | 395 / 650 / 1000 | 390 / 650 / 1000 | 650 / 1000 |
*The Specifications are subject to change without prior notice.
Floor Space
YNC-N200DS (TNC-N200DS-B / DST / DST-B)
Twin Spindle
Work Range
TNC-N200DS
TNC-N200DS-B
TNS-N200DST(TNC-N200DST-B)
Model | A | B | C | D | E | F |
TNC-N200DST | M-206A5 | M-208A6 | 170 | 520 | 526 | 186 |
TNC-N200DST-B | M-206A5 | M-206A5 | 185 | 505 | 511 | 186 |
Spindle & Bearings
Spindle & Bearings
Power Turret With C-axis
Examples For Machining With Driving Tools
Tools Presetter
Driving Tool System
Spindle Output And Torque
Interference Drawing
Standard Accessories (TNC-N200DS/DS-B/DST/DST-B)
- FANUC 0iT controller for DS series, 18iTB controller for DST series
- FANUC two years guaranty (Europe area only)
- Hydraulic hollow chuck and cylinder on main spindle, 6” chuck on sub-spindle
- 12 stations turret with tool disk
- Auto coolant (internal with open flow), hydraulic & lubrication system
- Work light
- Chip conveyor
- Tool box with tools & manuals
Standard Accessories (TNC-N200/N250/N300)
- FANUC 0iT controller
- FANUC two years guaranty (Europe area only)
- 8” Hydraulic hollow chuck and cylinder on TNC-N200 and TNC-200L
10” Hydraulic hollow chuck and cylinder on TNC-N300 - 12 station hydraulic turret with tool disk
- Auto coolant (internal with open flow), hydraulic & lubrication system
- Work light
- Chip conveyor
- Tool box with tools & manuals
Options (TNC-N200DS/DS-B/DST/DST-B)
- Extra bar capacity, hydraulic chuck & motor
- Collet chuck
- Soft jaws
- Chuck air cleaner
- Driving tool turret with C axis / spindle indexing
- Driving tool turret with Y axis [stroke ±40mm, X axis motor α22iB (4kw), Z axis motor α12i (3kw)]
- VDI driving tool holder
- Tool presetter (Auto / Semi-auto)
- Auto door
- Parts catcher for sub spindle
- Bar feeder
- Software for bar feeder (with relay)
- Hydrodynamic auto bar feeder
- Transformer (power supply except 220V)
- CE mark
Options (TNC-N200/N250/N300)
- Extra bar capacity, hydraulic chuck & motor
- Collet chuck
- Soft jaws
- Chuck air cleaner
- Driving tool turret with C axis / spindle indexing
- Driving tool turret with Y axis [stroke ±40mm, X axis motor α22iB (4kw), Z axis motor α12i (3kw)]
- VDI driving tool holder
- Tool presetter (Auto / Semi-auto)
- Auto door
- Parts catcher
- Bar feeder
- Software for bar feeder (with relay)
- Hydrodynamic auto bar feeder
- Transformer (power supply except 220V)
- CE mark
Twin-spindle process (TNC-N200DST)
Loading Unloading system (TNC-N200 series)