詳細介紹
ZRS-2灼熱絲針焰試驗機(生產廠家)
二、主要技術參數
Two, the main technical parameters
1.灼熱絲溫度: 500~1000℃±2℃連續可調
1 hot wire temperature: 500~1000 - 2 Deg. C can be adjusted continuously
2.灼熱時間: 0-999.9s±0.1s可調 (一般選擇為30s)
2 burning time: 0-999.9s + 0.1s adjustable (select for 30s)
3.起燃時間: 0-999.9s±0.1s,自動記錄,手動暫停
3 /: 0-999.9s + 0.1s, automatic recording, manual pause
4.熄滅時間: 0-999.9s±0.1s,自動記錄,手動暫停
4 out of time: 0-999.9s + 0.1s, automatic recording, manual pause
5.熱 電 偶:Φ0.5mm進口鎧裝(K型)熱電偶
5: 0.5mm imported armoured thermocouple (type K) thermocouple
6.灼 熱 絲:Φ4 mm的鎳鉻絲
6: hot wire nichrome wire with the diameter of 4 mm.
7.燙入深度:7mm±0.5mm
7 hot into the depth: 7mm + 0.5mm
8.樣品壓力:1N±0.2N
8 sample pressure: 1N + 0.2N
9.試驗速度:14mm/s 。
9 test speed: 14mm/s.
10.采用紅線光電停止開關,使限位更加精準.
10 the use of the red line to stop the switch, so that the limit is more accurate.
11.可控硅控制調溫系統,使溫度調節更準確。
11 SCR control temperature control system, make the temperature control more accurate.
12.時間、溫度數字顯示,觀察記錄方便
12 time, temperature, digital display, easy to observe and record
13.試驗背景:黑背景。
13 test background: Black background.
14.試驗過程:試驗程序自動控制,獨立抽風
14 test: test program automatic control, independent exhaust
15.工作室體積:0.5 立方,(可根據客戶要求定做不銹鋼機箱、0.75
15 studio volume: 0.5 cubic meters, can be customized according to customer requirements of stainless steel chassis, 0.75
立方或 1 立方 )
Cubic or 1 cubic meters
16.設備外尺寸:1000mm寬×650mm深×1300mm高
16 equipment outside size: 1000mm wide x 650mm deep x 1300mm high
五、適用標準
Five, applicable standards
IEC60695 UL746A IEC829 DIN695 VDE0471
UL746A IEC829 DIN695 VDE0471 IEC60695
一、灼熱絲針焰試驗機(生產廠家)使用范圍
First, the scope of use
灼熱絲試驗儀將規定材質(Ni80/Cr20)和形狀的電熱絲 (Φ4 mm的鎳鉻絲)用大電流加熱至試驗溫度 ( 550 ℃ ~ 960 ℃ 1mi后,以規定壓力 (1.0N) 垂直灼燙試品 30s ,視試品和鋪墊物是否起燃或持燃時間來測定電工電子設備成品的著火危險性;測定固體絕緣材料及其它固體可燃材料的起燃性、起燃溫度 (GWIT) 、可燃性和可燃性指數 (GWFI),也適用于絕緣材料、工程塑料或其它固體可燃材料行業 。
Glow wire test instrument will provide material (Ni80/Cr20) and the shape of the heating wire (nichrome wire Phi 4 mm) with high current heating to the test temperature (550 DEG to 960 DEG 1mi, to the required pressure (1.0N) vertical burning test 30s, as the sample and bedding material whether burning or burning time to determine the fire hazard of electrical and electronic equipment products; Determination of solid insulating materials and other solid combustible materials ignition, ignition temperature (GWIT), flammable and combustible index (GWFI), is also applicable to plastic insulation materials, engineering or other solid combustible materials industry.
三、隨貨清單
Three, with the cargo list
說明書 份 1
Manual copy 1
燃燒箱 臺 1
Combustion chamber 1
接物盤 件 1
Receiving disc 1
松木板 份 1
Pine board 1
合格證 份 1
Certificate of qualification 1
砝碼(0.5N) 個 2
Weight (0.5N) 2
不銹鋼量規 個 1
A 1 gauge stainless steel
排煙管 根 1
Exhaust pipe root 1
電源線 根 1
Power cord 1
保險絲 個 1
Fuse 1
四、設計標準
Four, design standards
GB/T5169.10-2006 GB5169.11 GB4706.1
GB5169.11 GB4706.1 GB/T5169.10-2006