1756-IA16I/ABPLC模塊
發端的數據信號是相對于信號地,如從DTE設備發出的數據在使用DB25連接器時是2腳相對7腳(信號地)的電平,DB25各引腳定義參見圖1。典型的RS-232信號在正負電平之間擺動,在發送數據時,發送端驅動器輸出正電平在+5~+15V,負電平在-5~-15V電平。當無數據傳輸時,線上為TTL,從開始傳送數據到結束,線上電平從TTL電平到RS-232電平再返回TTL電平。接收器典型的工作電平在+3~+12V與-3~-12V。由于發送電平與接收電平的差僅為2V至3V左右,所以其共模抑制能力差,再加上雙絞線上的分布電容,其傳送距離大為約15米,高速率為20kb/s。RS-232是為點對點(即只用一對收、發設備)通訊而設計的,
1756-IA16I/ABPLC模塊
1756
MFR. PART NUMBER DESCRIPTION
1756-A10 10 SLOT CONTROLLOGIX CHASSIS
1756-A13 13 SLOT CONTROLLOGIC CHASSIS
1756-A17 CHASSIS 17 SLOT CONTROLLOGIX
1756-A4 4 SLOT CONTROLLOGIX CHASIS
1756-A7 7 SLOT CONTROLLOGIX CHASSIS
1756-BA1 LOGIX5000 BATTERY ASSEMBLY
1756-CFM 2 CHANNEL /2 OUT CONFIGURABLE FLOWMETER
1756-CNB CONTROLNET BRIDGE MODULE
1756-CNBR CONTROLNET REDUNDANT BRIDGE MODULE
1756-CP3 LOGIX5000 RS232 PROGRAMMER CABLE
1756-DHRIO 2 CHANNEL DH+ AND/OR RIO SCANNER
1756-DNB DEVICE NET BRIDGE/SCANNER MODULE
1756-DPALEN CONTROLLOGIC SYSTEM DOCUMENTATION SET PRINTED
1756-ENET ETHERNET/IP BRIDGE MODULE
1756-GTWY CONTROLLOGIC GATEWAY CONFIGURATION SOFTWARE
1756-GTWYR SUPT REINSTATEMENT CONTRACT FOR 1756GTWY
1756-GTWYS SUPT RENEWAL CONTRACT FOR 1756GTWY
1756-HSC 2 CHANNEL /4 OUTPUT HIGH SPEED COUNTER
1756-IA16 79-132 VAC INPUT 16PTS
1756-IA16I 79-132 VAC ISOLATED INPUT 16PTS
1756-IA8D VAC DIAGNOSTIC INPUT 8PTS
1756-IB16 VDC INPUT 16PTS
1756-IB16D VDC DIAGNOSTIC INPUT
1756-IB16I VDC ISLOTED INPUT 16PTS