NC-30(BP)桌式伺服多軸鉆攻機床采用伺服驅動主軸自動進退刀，可實現自動快速進退刀，慢速工進加工，可實現多段自動退屑分段加工，可以實現鉆孔作業，也可以實現攻牙作業。配備觸摸式人機界面控制屏，可直觀、方便、簡單的實現操作。配合多軸器實現多軸鉆攻作業，是目前*前端的NC-30(BP)桌式伺服多軸鉆攻機床。加工時切削液自動供給，配套豪華式防水鈑金及斜坡式排屑磚利設計床身。是理想的多軸鉆孔加工母機。
      NC-30(BP)桌式伺服多軸鉆攻機床比傳統油壓自動多軸鉆床的優點：
      1.節能：比傳統的油壓自動多軸鉆床更加省電。響應國家節能減排。
      2.節省*的維護費用：節省初史油壓油的購買費用及以后定期更換液壓油的費用。
      3.故障排除簡單：采用PLC控制，維修、故障排除簡單方便。

      4.采用人機界面：操作簡單。

 

    The NC-30(BP) table servo multi-axis drilling machine tool adopts a servo drive spindle automatic quail knife, which can achieve automatic rapid quagmire knife, slow work processing, can achieve multiple sections of automatic dander section processing, can achieve drilling operations, can also achieve teeth attack work. Equipped with a touch-type human-machine interface control screen, it can be intuitively, conveniently and simply implemented. With multi-axis device to achieve multi-axis drilling operations, is the most front-end NC-30(BP) table servo multi-axis drilling machine tool. Automatic supply of cutting fluid during processing, matching luxury waterproof sheet metal and sloping chip patent design bed. It is an ideal multi-axis drilling machine.

 

The advantages of the NC-30(BP) table servo multi-axis drilling machine tool over the traditional hydraulic automatic multi-axis drilling machine:
1. Energy conservation: More energy saving than traditional hydraulic automatic multi-axis drilling machines. Respond to national energy conservation and emission reduction.
2. Save long-term maintenance costs: Save the purchase cost of initial hydraulic oil and the cost of replacing hydraulic oil regularly later.
3. Simple troubleshooting: PLC control, maintenance, simple and convenient troubleshooting.
4. Adopt human-computer interface: simple operation.

NC-30(BP)桌式伺服多軸鉆攻機床

NC-30(BP) table servo multi-axis drilling machine tool 

規格	NC-30（BP）
工作桌面有效尺寸	Φ490
立柱外徑	Φ130
主軸外徑	Φ115
主軸錐度	MT4
主軸心至工作桌面的距離	300-800mm
主軸行程	160mm
主軸轉速	無極調速
主軸功率	選配
主軸進刀	無極調速
*大鉆攻能力	Φ30/M30（S45C）
總重量	850KG

NC-30(BP)桌式伺服多軸鉆攻機床可以鉆孔、也可以攻牙。加工通的螺紋孔時，可以采用鉆攻復合*一次性完成螺紋底孔的鉆孔加工、攻牙加工。The NC-30(BP) table servo multi-axis drilling machine can be drilled or attacked. When processing through the thread hole, can be used to drill the composite tool to complete the screw bottom hole drilling processing, tooth attack processing.