SU型圓型-可調式多軸器-無錫耐玖機電設備有限公司

(中切削)SU型圓型可調式多軸器

(medium cutting) SU circular adjustable multi-axle

		◇SU型圓型可調式多軸器（多軸器/多軸頭/多軸鉆/群鉆）結構利用齒輪箱配合萬向節頭所組成，容易調整,加工孔距不受齒輪限制，節省調整的時間，也少有死角的限制，適合加工接近圓周分布的工作，(中切削)SU型圓型多軸鉆孔器是可調試中*容易操作使用的規格。為保萬向節頭這壽命，移動范圍不得超過15度，等于垂直這前后左右30mm以內（盡量配合工作之孔距坐標，設計齒輪箱結構即定鏜孔位） ※(中切削)SU型圓型可調式多軸器萬向節注意事項： 1、調整時不能超過規定的角度15度２、如超過些極限心軸易磨損或斷裂３、工作時應經常加潤滑油脂 SU-type circular adjustable multi-axle device(multi-axle/multi-axle/multi-axle/multi-axle drill/group drill) structure composed of gearbox with universal joint head, easy to adjust, processing hole distance is not limited by gear, save adjustment time, There are also few dead angle restrictions, suitable for processing work close to the circular distribution,(medium cutting) SU round multi-axis drilling device is the most easily operated specifications in debugging. In order to protect the life of the universal node, the range of movement must not exceed 15 degrees, which is equal to the vertical front and rear within 30 mm. (As far as possible with the working hole distance coordinates, the design gear box structure is fixed boring hole position) (medium cutting) SU type circular adjustable multi-axis device universal joint note: 1, adjustment can not exceed the specified angle 15 degrees 2, if more than some limit of the axis easily wear or break Always lubricate your work with grease Has the following specifications: SU 110/SU165/SU200/SU250/SU 300 有以下規格:SU110/SU165/SU200/SU250/SU300
型號	SU110	SU165	SU200	SU250	SU300
筒夾規格/ 鉆孔能力	ER8/5 ER11/7 ER16/10 ER20/13 C5/5 C6/6 C9/9 C12/12	ER8/5 ER11/7 ER16/10 ER20/13 C5/5 C6/6 C9/9 C12/12	ER8/5 ER11/7 ER16/10 ER20/13 C5/5 C6/6 C9/9 C12/12	ER8/5 ER11/7 ER16/10 ER20/13 C5/5 C6/6 C9/9 C12/12	ER8/5 ER11/7 ER16/10 ER20/13 C5/5 C6/6 C9/9 C12/12
轉速比	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2
兩軸*小間距	13 18 26 28	13 18 26 28	13 18 26 28	13 18 26 28	13 18 26 28
*大軸心范圍	110	165	200	250	300
軸數	2-6	2-10	4-12	4-12	4-12