SWU110/SWU165/SWU200/SWU250/SWU300-重切削可調多軸器-無錫耐玖機電設備有限公司

SWU型圓型重切削可調多軸器

SWU circular heavy cutting adjustable multi-axle

◇SWU型圓型重切削可調多軸器（多軸鉆孔器/多軸頭/多軸鉆/群鉆）結構利用齒輪箱配合萬向節頭所組成，容易調整,加工孔距不受齒輪限制，節省調整的時間，也少有死角的限制，適合加工接近圓周分布的工作，SWU型圓型重切削可調式多軸器是可調試中*容易操作使用的規格。為保萬向節頭這壽命，移動范圍不得超過15度，等于垂直這前后左右30mm以內 （盡量配合工作之孔距坐標，設計齒輪箱結構即定鏜孔位） ※SWU型圓型重切削可調多軸器萬向節注意事項： 1、調整時不能超過規定的角度15度２、如超過些極限心軸易磨損或斷裂３、工作時應經常加潤滑油脂 SWU type circular heavy cutting adjustable multi-axis device(multi-axis driller/multi-axis head/multi-axis drill/group drill) structure using a gearbox with universal joint head, easy to adjust, processing hole distance is not limited by gear, save adjustment time, There are also few dead angle restrictions, suitable for processing work close to the circular distribution, SWU-type circular heavy cutting adjustable multi-axle device is the most easily operated specifications in debugging. In order to protect the life of the universal node, the range of movement must not exceed 15 degrees, which is equal to the vertical front and rear within 30 mm. (As far as possible with the working hole distance coordinates, the design gear box structure is fixed boring hole position) Notes for the universal section of the SWU type adjustable multi-axis cutter for heavy cutting: 1, adjustment can not exceed the specified angle 15 degrees 2, if more than some limit of the axis easily wear or break Always lubricate your work with grease 有以下規格(With the following specifications):SWU110/SWU165/SWU200/SWU250/SWU300
型號	SWU110	SWU165	SWU200	SWU250	SWU300
筒夾規格/ 鉆孔能力	ER20/13 ER25/16	ER20/13 ER25/16	ER20/13 ER25/16	ER20/13 ER25/16	ER20/13 ER25/16
轉速比	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2
兩軸*小間距	42 45	42 45	42 45	42 45	42 42
*大軸心范圍	110	165	200	250	300
軸數	2-6	2-6	4-10	4-10	4-10