WSU方型-重切削可調多軸器-無錫耐玖機電設備有限公司

WSU型重切削可調多軸器

WSU type heavy cutting adjustable multi-axis device

				◇WSU型重切削可調多軸器（多軸鉆孔器/多軸器/多軸鉆/群鉆）結構利用齒輪箱配合萬向節頭所組成，容易調整,加工孔距不受齒輪限制，節省調整的時間，也少有死角的限制，SWU型系列多軸頭其軸承、齒輪、輸出軸、萬向節均采用強力系列，適合加工鋼件等強力場合。SWU型系列多軸頭為保萬向節頭這壽命，移動范圍不得超過15度，等于垂直這前后左右30mm以內 （盡量配合工作之孔距坐標，設計齒輪箱結構即定鏜孔位） ※WSU型重切削可調多軸器萬向節注意事項： 1、調整時不能超過規定的角度15度２、如超過些極限心軸易磨損或斷裂３、工作時應經常加潤滑油脂 WSU type heavy cutting adjustable multi-axis device(multi-axis driller/multi-axis drill/multi-axis drill/group drill) structure composed of gear box with universal joint head, easy to adjust, processing hole distance is not limited by gear, save adjustment time, There are also few limitations on the dead angle. SWU-type series multi-axle heads have powerful series of bearings, Gears, output shafts, and cardan joints, which are suitable for processing steel parts and other powerful occasions. SWU series multi-axle head for the life of the universal node, the range of movement must not exceed 15 degrees, equal to the vertical front and rear about 30 mm or less (As far as possible with the working hole distance coordinates, the design gear box structure is fixed boring hole position) WSU type heavy cutting adjustable multi-axis device universal joint note: 1, adjustment can not exceed the specified angle 15 degrees 2, if more than some limit of the axis easily wear or break Always lubricate your work with grease
型號	SWU110	SWU165	SWU200	SWU250	SWU100×165	SU120×200	SU120×300
筒夾規格/ 鉆孔能力	ER20/13 ER25/16 C12/12	ER20/13 ER25/16 C12/12	ER20/13 ER25/16 C12/12	ER20/13 ER25/16 C12/12	ER20/13 ER25/16 C12/12	ER20/13 ER25/16 C12/12	ER20/13 ER25/16 C12/12
轉速比	1:1	1:1	1:1	1:1	1:1	1:1	1:1
兩軸*小間距	42 45	42 45	42 45	42 45	42 45	42 45	42 45
*大軸心范圍	110	152	190	240	90×152	106×190	10×290
軸數	2-8	2-10	4-12	4-12	3-18	4-12	6-14