機床商務網
詳細介紹
產品參數
無后拉和補償?shù)目ūP夾緊工件時，卡爪翹起，把軸推離中心定位，如尾座的力不能
克服這個翹起的力，則會導致工件的彎曲。
The workpiece is clamperd without back pull and compensation, The jaw is up,
pushing the shaft from the center, If the force of the tail can't overcome this
lifting force,It will cause the workpiece to bend.
尾座只需支撐工件的力，卡盤把工件拉向中心，工件不發生彎曲，加工出來的
軸同軸度非常好;當軸的外徑與中心孔不同軸時，卡爪的補償作用就凸顯出來了。
The rear seat only needs the force to support the workpiece,The card disc pulls
the workpiece to the canter ofthe cencer,The workpiece does not bend, The
overlap of the shaft is verygood;when the outer diameter of the shaft does not
overlap with the center hole,The compensation of the claw is highlighted.
尺寸圖 Size Fig
尺寸參數 Dimensions(mm)
| 規格 Spec | A | B | C(H6) | D | D1 | D2 | E | G | H | J | L | M | N | P | T |
| 型號 Model | |||||||||||||||
| 3BD-06A5 | 168 | 116 | 140 | 104.8 | 82.56 | 24 | 15 | 4-20 | 38 | 50 | 52 | M10x120 | 55 | 14 | 34 |
| 3BD-08A6 | 210 | 127 | 170 | 133.4 | 106.38 | 32 | 17 | 9-29 | 38 | 58 | 61 | M12x125 | 67 | 20 | 41.5 |
性能參數 Specifications
| 規格 Spec | 楔心行程 Piunger stroke(mm) | 爪行程(直徑) Jaw stroke(mm) | 許用推拉力 Max.Pull force KN(kgf) | 大夾緊力 Max. Gripping force KN(kgf) | 極限轉速 Max. Speed (r/min) | 夾緊范圍 Gripping range(mm) | 補償量h | 慣量 Moment of inertial (kg.m2) | 重量 Weight(kg) | 適用油缸 Matching cylinder | 大使用壓力 Max. pressure MPa(kgf/cm2) |
| 型號 Model | |||||||||||
| 3BD-06A5 | 16 | 13 | 14.7(1500) | 25.0(2550) | 3500 | 6-35 | 5 | 0.5 | 13 | SY-100 | 2.1(21) |
| 3BD-08A6 | 20 | 18 | 19.6(2000) | 34.3(3500) | 3000 | 16-65 | 6 | 0.5 | 22 | SY-100 | 2.8(28) |
注：3BT-06型為彈性型夾。工作時，以中心為基準補正，同時可使工件接觸到端面，便于軸向定位。
3BT-06Type Use either spring center,when clamping the workpiece,it is based on the center,
The workpiece can also be pulled to the position plane,For easy axial position confirmation.
機床商務網