機床商務網
詳細介紹
杠桿式補償型動力卡盤
⋅ 軸類加工夾具，卡爪對工件具有后拉和補償式夾緊的功能，(該卡盤夾持力提供加工時的扭矩和后拉力); 對中心的補償量為5mm。
⋅ 在以軸心為基準(*定位)、要求與軸有同軸度時使用。
⋅ 使用法蘭連接，安裝方便。
⋅ Spindle type machining fixture,the card claw has the function of post-pull and compensating clamp on the workpiece，(The chuck holds the torque and rear pullof the processing) Forjaw compensation to the cener,thestandardis ∅5mm and available for up to ø10mm.
⋅ Based on the center of the axis, (Two thimbles) The center of the axis is the same as the axis of the axis, You can use.
⋅ Use chuck adaptor, Easy.
杠桿式補償型動力卡盤
尺寸參數 Dimensions(mm)
規格 Spec | A | B | C(H6) | D | D1 | D2 | E | G | H | J | L | M | N | P | T |
型號 Model | |||||||||||||||
3BD-06A5 | 168 | 116 | 140 | 104.8 | 82.56 | 24 | 15 | 4-20 | 38 | 50 | 52 | M10x120 | 55 | 14 | 34 |
3BD-08A6 | 210 | 127 | 170 | 133.4 | 106.38 | 32 | 17 | 9-29 | 38 | 58 | 61 | M12x125 | 67 | 20 | 41.5 |
性能參數 Specifications
規格 Spec | 楔心行程 Piunger stroke(mm) | 爪行程(直徑) Jaw stroke(mm) | 許用推拉力 Max.Pull force KN(kgf) | 大夾緊力 Max. Gripping force KN(kgf) | 極限轉速 Max. Speed (r/min) | 夾緊范圍 Gripping range(mm) | 補償量h | 慣量 Moment of inertial (kg.m²) | 重量 Weight(kg) | 適用油缸 Matching cylinder | 大使用壓力 Max. pressure MPa(kgf/cm²) |
型號 Model | |||||||||||
3BD-06A5 | 16 | 13 | 14.7(1500) | 25.0(2550) | 3500 | 6-35 | 5 | 0.5 | 13 | SY-100 | 2.1(21) |
3BD-08A6 | 20 | 18 | 19.6(2000) | 34.3(3500) | 3000 | 16-65 | 6 | 0.5 | 22 | SY-100 | 2.8(28) |
機床商務網