機床商務網
詳細介紹
高脈沖能量調Q納秒激光器
特性：
l 單脈沖能量可達100mJ，平均功率4W
l 單脈沖至100Hz重復頻率
l 1.5-10ns脈沖寬度，連續可調
l 內置同步脈沖生成qi以便觸發用戶設備
l 通過集成的網絡接口遠程監控及控制
l 衰減器附件可選
l 脈沖能量監控可選
l 可連接二次諧波發生器可選
l 獨立多次諧波發射器可選
高脈沖能量調Q納秒激光器應用：
l 激光誘導擊穿光譜（LIBS）
l 激光探測及測距
l LCD維修
l 激光去除、清潔
l 飛行時間光譜學（TOFS）
l 激光誘導熒光光譜
l 激光閃光光解
l 脈沖光沉積
該系類二極管泵浦激光器采用全風冷、緊湊型設計，可適用于大量需求高峰值功率激光脈沖的應用。體積緊湊便于集成、遠程控制。通過網口連接，無需單獨安裝控制軟件，任何電腦甚至手機都可以進行操作。用戶界面方便，無需復雜維護。典型常規配置如下：
Specifications at 10 Hz pulse repetition rate 1)
| Model | Q1 | |||
-B10 | -C10 | -D10 | -E10 | |
| Wavelength | 1053 or 1064 nm | 1064 nm | 1053 nm | |
| Pulse repetition rate | Single-shot to 10 Hz | |||
| Pulse duration | < 8 ns | < 7 ns | ||
| Pulse energy @ | ||||
| 1053/1064 nm | 10 mJ | 20 mJ | 35 mJ | 45 mJ |
| 526.5/532 nm | 5 mJ | 10 mJ | 17 mJ | 22 mJ |
| 351/355 nm | 3 mJ | 6 mJ | 10 mJ | 13 mJ |
| 263/266 nm | 1.5 mJ | 3 mJ | 5 mJ | 7 mJ |
| 211/213 nm | 0.5 mJ | 1 mJ | 2 mJ | 2.5 mJ |
| Pulse to pulse energy stability @ | ||||
| 1053/1064 nm | <0.5 % RMS | |||
| 526.5/532 nm | <2.5 % RMS | |||
| 351/355 nm | <3.5 % RMS | |||
| 263/266 nm | <4 % RMS | |||
| 211/213 nm | <5 % RMS | |||
| Power drift 6) | ± 3.0 % | |||
Beam profile | Bell-shaped, >75 % fit to Gaussian | |||
| Beam divergence 7) | <1 mrad | |||
| Beam pointing stability 8) | < 10 µrad | |||
| Polarization | Linear, horizontal | |||
| Typical beam diameter 9) | 1.7 mm | 2.5 mm | 3.5 mm | |
| Jitter 10) | < 0.5 ns RMS | |||
| Optional motorized attenuator 10) | ||||
Transmission range | 0.5 – 95 % | |||
| Dimensions | ||||
| Laser head ( W×L×H) | 110 × 231× 112 mm3 | |||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | |||
| Power adapter (W×L×H)12) | 50 × 125 × 31 mm3 | |||
| Harmonic generator (W×L×H)13) | 110 × 242× 112 mm3 | |||
| Operating requirements | ||||
Cooling requirements | Air cooled | |||
| Ambient temperature | 15 – 30 ºC | |||
| Relative humidity | 10 – 80 % (non-condensing) | |||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 14) | |||
| Average power consumption | 15 W | 25 W | 30 W | |
Specifications at 20 Hz pulse repetition rate 1)
| Model | Q1 | ||
-B20 | -C20 | -D20 | |
| Wavelength | 1053 or 1064 nm | ||
| Pulse repetition rate2) | Single-shot to 20 Hz | ||
| Pulse duration 3) | <8 ns | ||
| Pulse energy @ 4) | |||
| 1053/1064 nm | 8 mJ | 15 mJ | 25 mJ |
| 526.5/532 nm | 4 mJ | 7.5 mJ | 12.5 mJ |
| 351/355 nm | 2.5 mJ | 5 mJ | 7.5 mJ |
| 263/266 nm | 1 mJ | 1.8 mJ | 3 mJ |
| 211/213 nm | 0.4 mJ | 0.7 mJ | 1.2 mJ |
| Pulse to pulse energy stability @ 5) | |||
| 1053/1064 nm | < 0.5 % RMS | ||
| 526.5/532 nm | <2.5 % RMS | ||
| 351/355 nm | <3.5 % RMS | ||
| 263/266 nm | <4 % RMS | ||
| 211/213 nm | <5 % RMS | ||
| Power drift 6) | ± 3.0 % | ||
Beam profile | Bell shaped, >75 % fit to Gaussian | ||
| Beam divergence 7) | <1.5 mrad | ||
| Beam pointing stability 8) | < 20 µrad | ||
| Polarization | Linear, horizontal | ||
| Typical beam diameter 9) | 1.7 mm | 2.0 mm | 2.5 mm |
| Jitter 10) | < 0.5 ns RMS | ||
| Optional motorized attenuator 11) | |||
Transmission range | 1 – 95 % | ||
| Dimensions | |||
| Laser head ( W×L×H) | 110 × 231× 112 mm3 | ||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | ||
| Power adapter (W×L×H)12) | 50 × 125 × 31 mm3 | ||
| Harmonic generator (W×L×H)13) | 110 × 242× 112 mm3 | ||
| Operating requirements | |||
Cooling requirements | Air cooled | ||
| Ambient temperature | 15 – 30 ºC | ||
| Relative humidity | 10 – 80 % (non-condensing) | ||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 14) | ||
| Average power consumption | <30 W | ||
Specifications at 50 Hz pulse repetition rate 1)
| Model | Q1 | ||
-50 | -A50 | -B50 | |
| Wavelength, nm | 1053 or 1064 nm | ||
| Pulse repetition rate2) | Single-shot to 50 Hz | ||
| Pulse duration 3) | < 10 ns | <9 ns | <8 ns |
| Pulse energy @ 4) | |||
| 1053/1064 nm | 2.5 mJ | 5 mJ | 10 mJ |
| 526.5/532 nm | 1.2 mJ | 2.5 mJ | 5 mJ |
| 351/355 nm | 0.6 mJ | 1.5 mJ | 3 mJ |
| 263/266 nm | 0.3 mJ | 0.7 mJ | 1.5 mJ |
| 211/213 nm | 0.1 mJ | 0.2 mJ | 0.5 mJ |
| Pulse to pulse energy stability @ 5) | |||
| 1053/1064 nm | < 0.5 % RMS | ||
| 526.5/532 nm | <2.5 % RMS | ||
| 351/355 nm | <3.5 % RMS | ||
| 263/266 nm | <4 % RMS | ||
| 211/213 nm | <5 % RMS | ||
| Power drift 6) | ± 3.0 % | ||
Beam profile | Nearly TEM00, >80 % fit to Gaussian | ||
| Beam divergence 7) | <1.5 mrad | ||
| Beam pointing stability 8) | < 20 µrad | ||
| Polarization | Linear, horizontal | ||
| Typical beam diameter 9) | 1.0 mm | 1.3 mm | 1.5 mm |
| Jitter 10) | < 0.5 ns RMS | ||
| Optional motorized attenuator 11) | |||
Transmission range | 1 – 95 % | ||
| Dimensions | |||
| Laser head ( W×L×H) | 110 × 231× 112 mm3 | ||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | ||
| Power adapter (W×L×H)12) | 50 × 125 × 31 mm3 | ||
| Harmonic generator (W×L×H)13) | 110 × 242× 112 mm3 | ||
| Operating requirements | |||
Cooling requirements | Air cooled | ||
| Ambient temperature | 15 – 30 ºC | ||
| Relative humidity | 10 – 80 % (non-condensing) | ||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 14) | ||
| Average power consumption | <40 W
| ||
Specifications at 10 Hz pulse repetition rate 1)
| Model | Q2 | ||||
-B10 | -C10 | -D10 | -E10 | -F10 | |
| Wavelength, nm | 1053 or 1064 nm | 1053 nm | |||
| Pulse repetition rate2) | 10 Hz | ||||
| Pulse energy, mJ | 8 mJ | 15 mJ | 30 mJ | 60 mJ | 80 mJ |
| Typical pulse duration 3) | < 8 ns | <7 ns | <5 ns | ||
| Pulse energy stability 4) | < 0.5 % RMS | ||||
| Power drift 5) | ± 3.0 % | ||||
Beam profile | Bell-shaped, >80% fit to Gaussian | ||||
| Beam divergence 6) | <1 mrad | ||||
| Polarization | Linear, horizontal | ||||
| Typical beam diameter 7) | 1.5 mm | 2.0 mm | 3.0 mm | 4.0 mm | |
| Jitter 8) | < 0.5 ns RMS | ||||
| Optional harmonics generator 9) | |||||
| Pulse energy | |||||
| 526.5/532 nm | 4 mJ | 7 mJ | 15 mJ | 30 mJ | 40 mJ |
| 351/355 nm | 2.4 mJ | 4.5 mJ | 9 mJ | 18 mJ | 24 mJ |
| 263/266 nm | 1.6 mJ | 2.8 mJ | 6 mJ | 12 mJ | 16 mJ |
| 211/213 nm | 0.4 mJ | 1 mJ | 2 mJ | 4 mJ | 5 mJ |
| Optional attenuator 10) | |||||
Transmission range | 0.5 – 95 % | ||||
| Dimensions | |||||
| Laser head ( W×L×H) | 160× 230× 141 mm3 | ||||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | ||||
| Power adapter (W×L×H) 11) | 80 × 120 × 60 mm typical | ||||
| Operating requirements | |||||
Cooling requirements | Air cooled | ||||
| Ambient temperature | 15 – 30 ºC | ||||
| Relative humidity | 10 – 80 % (non-condensing) | ||||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 12) | ||||
| Average power consumption | 30 W | 40 W | 50 W | 60 W | |
Specifications at 20 Hz pulse repetition rate 1)
| Model | Q2 | |||
-B20 | -C20 | -D20 | -E20 | |
| Wavelength, nm | 1053 or 1064 nm | 1053 nm | ||
| Pulse repetition rate2) | 20 Hz | |||
| Pulse energy, mJ | 10 mJ | 20 mJ | 50 mJ | 70 mJ |
| Typical pulse duration 3) | < 7 ns | < 5 ns | ||
| Pulse to pulse energy stability 4) | < 0.5 % RMS | |||
| Power drift 5) | ± 3.0 % | |||
Beam profile | Bell-shaped, >80 % fit to Gaussian | |||
| Beam divergence 6) | <1 mrad | |||
| Polarization | Linear, horizontal | |||
| Typical beam diameter 7) | 1.5 mm | 3.0 mm | 4 mm | |
| Jitter 8) | < 0.5 ns RMS | |||
| Optional harmonics generator 9) | ||||
| Pulse energy | ||||
| 526.5/532 nm | 5 mJ | 10 mJ | 25 mJ | 35 mJ |
| 351/355 nm | 3 mJ | 6 mJ | 15 mJ | 20 mJ |
| 263/266 nm | 2 mJ | 4 mJ | 10 mJ | 12 mJ |
| 211/213 nm | 0.5 mJ | 1 mJ | 2 mJ | 3 mJ |
| Optional attenuator 10) | ||||
Transmission range | 0.5 – 95 % | |||
| Dimensions | ||||
| Laser head ( W×L×H) | 160× 230× 141 mm3 | |||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | |||
| Power adapter (W×L×H) 11) | 80 × 120 × 60 mm typical | |||
| Operating requirements | ||||
Cooling requirements | Air cooled | |||
| Ambient temperature | 15 – 30 ºC | |||
| Relative humidity | 10 – 80 % (non-condensing) | |||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 12) | |||
| Average power consumption | 30 W | 40 W | 70 W | 80 W |
Specifications at 50 Hz pulse repetition rate 1)
| Model | Q2 | ||
-B50 | -C50 | -D50 | |
| Wavelength, nm | 1053 or 1064 nm | 1064 nm | |
| Pulse repetition rate 2) | 50 Hz | ||
| Pulse energy, mJ | 10 mJ | 20 mJ | 40 mJ |
| Typical pulse duration 3) | < 7 ns | <6 ns | <5 ns |
| Pulse to pulse energy stability 4) | < 0.5 % RMS | ||
| Power drift 5) | ± 3.0 % | ||
Beam profile | Bell-shaped, >80 % fit to Gaussian | ||
| Beam divergence 6) | <1 mrad | ||
| Polarization | Linear, horizontal | ||
| Typical beam diameter 7) | 1.5 mm | 2.5 mm | 3.5 mm |
| Jitter 8) | < 0.5 ns RMS | ||
| Optional harmonics generator 9) | |||
| Pulse energy | |||
| 526.5/532 nm | 5 mJ | 10 mJ | 20 mJ |
| 351/355 nm | 3 mJ | 6 mJ | 12 mJ |
| 263/266 nm | 2 mJ | 4 mJ | 8 mJ |
| 211/213 nm | 0.5 mJ | 1 mJ | 2 mJ |
| Optional attenuator 10) | |||
Transmission range | 1 – 95 % | ||
| Dimensions | |||
| Laser head ( W×L×H) | 160× 230 × 141 mm3 | ||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | ||
| Power adapter (W×L×H) 11) | 80 × 120 × 60 mm typical | ||
| Operating requirements | |||
Cooling requirements | Air cooled | ||
| Ambient temperature | 15 – 30 ºC | ||
| Relative humidity | 10 – 80 % (non-condensing) | ||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 12) | ||
| Average power consumption | 50 W | 80 W | 100 W |
Specifications at 100/200 Hz pulse repetition rate 1)
| Model | Q2 | ||||
-200 | -100 | -A100 | -B100 | -C100 | |
| Wavelength, nm | 1064 nm | ||||
| Pulse repetition rate 2) | 200 Hz | 100 Hz | |||
| Pulse energy, mJ | 1 mJ | 2.5 mJ | 5 mJ | 10 mJ | 20 mJ |
| Typical pulse duration 3) | < 10 ns | <8 ns | <7 ns | ||
| Pulse to pulse energy stability 4) | < 0.5 % RMS | ||||
| Power drift 5) | ± 3.0 % | ||||
Beam profile | Bell-shaped, >80 % fit to Gaussian | ||||
| Beam divergence 6) | < 2 mrad | < 1.5 mrad | <1 mrad | ||
| Polarization | Linear, horizontal | ||||
| Typical beam diameter 7) | 1.5 mm | 2.0 mm | 2.5 mm | 3.5 mm | |
| Jitter 8) | < 0.5 ns RMS | ||||
| Optional harmonics generator 9) | |||||
| Pulse energy | |||||
| 532 nm | 0.5 mJ | 1.25 mJ | 2 mJ | 5 mJ | 10 mJ |
| 355 nm | 0.25 mJ | 0.6 mJ | 1 mJ | 3 mJ | 6 mJ |
| 266 nm | 0.1 mJ | 0.3 mJ | 0.7 mJ | 1.5 mJ | 3 mJ |
| 213 nm | 0.02 mJ | 0.06 mJ | 0.3 mJ | 0.7 mJ | 1 mJ |
| Optional attenuator 10) | |||||
Transmission range | 1 – 95 % | ||||
| Dimensions | |||||
| Laser head ( W×L×H) | 160× 230 × 141 mm3 | ||||
| Controller unit (W×L×H) | 108× 191 × 59 mm3 | ||||
| Power adapter (W×L×H) 11) | 192 × 178 × 46 mm3 typical (for +28 VDC output) | ||||
| Operating requirements | |||||
Cooling requirements | Air cooled | ||||
| Ambient temperature | 15 – 30 ºC | ||||
| Relative humidity | 10 – 80 % (non-condensing) | ||||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz 12) | ||||
| Average power consumption | 40 W | 50 W | 70 W | 80 W | 100 W
|
Specifications 1)
| Model | Q2HE | ||||||
| -D20 | -D50 | -D100 | -E20 | -E50 | -F10 | -F20 | |
| Wavelength | 1064 nm | 1053 nm | |||||
| Pulse repetition rate 2) | 20 Hz | 50 Hz | 100 Hz | 20 Hz | 50Hz | 10 Hz | 20 Hz |
| Pulse energy | 40 mJ | 70 mJ | 100 mJ | ||||
| Typical pulse duration 3) | < 7 ns | < 6 ns | |||||
| Pulse to pulse energy stability | <0.5 % RMS 4) | ||||||
| Power drift | ± 3.0 % 5) | ||||||
| Beam profile | Bell-shaped, >75 % fit to Gaussian | ||||||
| Beam divergence 6) | < 1 mrad | ||||||
| Polarization | Linear, horizontal | ||||||
| Typical beam diameter 7) | 3.0 mm | 4.0 mm | 5.0 mm | ||||
| Jitter | < 0.5 ns RMS8) | ||||||
| Optional harmonics generator 9) | |||||||
| Pulse energy, mJ | |||||||
| 526.5/532 nm | 20 mJ | 35 mJ | 50 mJ | ||||
| 351/355 nm | 12 mJ | 20 mJ | 30 mJ | ||||
| 263/266 nm | 5 mJ | 10 mJ | 15 mJ | ||||
| 211/213 nm | 1.5 mJ | 3 mJ | 6 mJ | ||||
| Optional attenuator 10) | |||||||
| Transmission range | 1% – 95 % | ||||||
| Dimensions | |||||||
| Laser head, (W×L×H) | 190 × 408 × 55 mm3 | ||||||
| Controller unit, (W×L×H) | 108× 191 × 59 mm3 | ||||||
| Power adapter, (W×L×H) | 192 × 178 × 46 mm3 typical | ||||||
| Operating requirements | |||||||
| Cooling requirements | Air cooled | ||||||
| Ambient temperature | 15 – 30 ºC | 15 – 27 ºC | |||||
| Relative humidity | 10 – 80 % (non-condensing) | ||||||
| Mains voltage | 90-230 VAC, single phase, 47-63 Hz. 11) | ||||||
| Average power consumption | 50 W | 100 W | 150 W | 80 W | 150 W | 70W | 120W |
機床商務網