3211M1潛水加速度傳感器

概述

The Dytran 3211M1 is a low profile IEPE accelerometer with a 10 mV/g sensitivity, weighing just 10 grams. The sensor features a factory molded urethane boot and a 10-foot integral urethane cable, for reliable operation in water depths to 175 psi.

Sensor design incorporates a ceramic shear sensing element for high natural frequency and integral low noise JFET electronics, encased within a rugged, lightweight titanium housing. The sensor is base isolated to avoid EMI/ground loop interference and mounts via #8 or M4 mounting screws.

Units are hermetically sealed for reliable operation in high humidity and dirty environments. A miniature thru hole design allows the sensor to be turned 360° prior to securing for ease of sensor installation.

特性

1. 10 mV/g sensitivity

2. 500g range

3. 1 to 10,000 Hz frequency range (±5%)

4. 10-foot integral cable

5. Ø.17 thru hole mount for #8 or M4 screw

6. 10 grams

7. Titanium

8. Hermetic

9. Base isolated

10. Low profile

11. 360° cable orientation

12. Submersible to 175 psi

13. IEPE

應(yīng)用

1. Underwater vibration measurements

2. Vibration testing in submersible environments

參數(shù)

Weight grams 9.6

Size Diameter inch 0.6

Height inch 0.42

Mounting Thru hole accommodates standard 8-32 or M4 bolt

Connector Type coaxial

Thread 10-32

Housing Material titanium alloy

Isolation case connected to signal ground and

isolated from mounting surface by

integral isolation washers

Sensing Element Material ceramic

Mode shear

PERFORMANCE

Sensitivity at 4mA mV/g 9.5 10 10.5

Measurement Range ±gpk 500

Frequency Range ±5% Hz 1 10000

PERFORMANCE SPECIFICATION

ACCELEROMETER, SINGLE AXIS

IEPE

Frequency Range, ±5% Hz 1 10000

Resonance Frequency kHz >31

Equivalent Noise 1Hz to 10kHz g rms 0.0005

Sensitivity vs Current 2mA to 10mA % 1

Transverse Sensitivity % 5

Polarity see outline drawing positive

ENVIRONMENTAL

Shock g pk 5000

Operating Temperature °F -67 250

Seal hermetic

Coefficient of Thermal Sensitivity %/°F 0.06

Magnetic Sensitivity at 100 Gauss g/Gauss 0.004

Thermal Shock Sensitivity g/°F 0.02

Base Strain Sensitivity g/µε 0.04

Stray Voltage Sensitivity 10V applied to equiv. g 0.004

mounting surface

ELECTRICAL

Supply Current mA 2 20

Compliance Voltage Vdc 18 30

Output Bias Room Temp Vdc 11 13.5

Operating Temp Vdc 8 16

Output Impedance ? 120

Discharge Time Constant sec 0.5

Warmup Time sec 2

配件

Recommended Accessories: model 4110C current source power unit

訂貨型號

3211M1

3211A1  通用型

3211A2  通用型