3120B加速度傳感器

概述

The Dytran 3120B is a double ended IEPE reference (comparison) accelerometer, offering a convenient means of determining the sensitivity and frequency response characteristics of unknown acceleration, velocity and displacement sensors. A vibration laboratory already equipped with an electrodynamic shaker and control system can easily incorporate use of the model 3120B to accomplish in-house NIST traceable calibrations. Model 3120B offers a 10 mV/g sensitivity, and mounts to a shaker head via 10-32 tapped hole.

Back-to-back comparisons with a double ended calibration standard accelerometer, such as the Dytran model 3120B, entails mounting the test accelerometer directly to the top mounting surface of the calibration standard (model 3120B) and driving the coupled pair with an electrodynamic shake system at various frequencies and amplitudes. At each test frequency, the amplitude is set and the corresponding output read from the test accelerometer. To form a complete measurement system, the user will need to supply the cables, power supply unit and electrodynamic shake system.

特性

1. 10 mV/g sensitivity

2. 500g range

3. 10 to 10,000 Hz frequency range (±2%)

4. 10-32 radial connector

5. 10-32 tapped holes, top and bottom

6. 85 grams

7. Stainless steel

8. Hermetic

9. Calibration standard accelerometer

10. IEPE

應(yīng)用

1. Back-to-back accelerometer calibration

2. Low frequency, low g level measurements

3. NIST traceable calibrations (when used with appropriate electrodynamic shaker, power supply and control system)

參數(shù)

SYSTEM SPECIFICATIONS VALUE UNITS

SYSTEM SENSITIVITY @ 100 Hz [1] 10.00 +/-.05 mV/G

FREQUENCY RESPONSE, ±2% [1] 10 to 10,000 Hz

LINEARITY +/- 1 % F.S.

RANGE F.S. FOR 5 VOLTS OUT +/- 500 G

OPERATING FORCE RANGE [2] +/- 40 Force-pounds

EQUIVALENT ELECTRICAL NOISE, (BROADBAND) .02 G, RMS

OUTPUT IMPEDANCE 2 Ohms

ACCELEROMETER MODEL 3120B SPECIFICATIONS

SENSITIVITY, ±5% 10.5 mV/G

DISCHARGE TIME CONSTANT 1.0 Sec

COEFFICIENT OF THERMAL SENSITIVITY .03 %/°F

TEMPERATURE RANGE -60 to +200 °F

TRANSVERSE SENSITIVITY, MAX 3 %

ELECTRICAL CONNECTOR, RADIAL 10-32 COAXIAL Jack

MOUNTING HOLES, TOP & BOTTOM 10-32 UNF-2B

MATERIAL (NON-MAGNETIC) 300 SERIES STAINLESS STEEL

SUPPLY CURRENT (CONSTANT CURRENT) 2 mA

COMPLIANCE VOLTAGE +20 VDC

WEIGHT 3/85 oz/grams

AMPLIFIER/POWER UNIT 4119B SPECIFICATIONS

SENSOR SUPPLY CURRENT/VOLTAGE, STD 2/+20 mA/VDC

FILTER, LOW PASS, ACTIVE VCVS 12 db/octave

SENSOR/OUTPUT CONNECTOR BNC/BNC Coaxial jack

INPUT POWER, STD MODEL, 115 VAC 2.4 VA

INPUT POWER, 'E' MODEL, 230 VAC 2.4 VA

POWER CORD, STD 6 FT 3-WIRE W/CHASSIS GND

WEIGHT 32/900 oz/grams

SIZE (H x W x D) [3] 5.5 x 1.6 x 8.0 Inches

(H x W x D) [3] 140 x 41 x 203 mm

TEMPERATURE RANGE 0 to +120 ° F

配件

Supplied Accessories: (1) model 6200 mounting stud (10-32 to 10-32)

Recommended Accessories: model 4010C current source power unit, model 6213 adhesive mounting base

Compatible Cables: 6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A

訂貨型號(hào)

3120B

3120BK