美國泰樂TYLER進口法蘭式全焊接球閥

產品描述-
美國泰樂TYLER進口法蘭式全焊接球閥在施工和維護煤氣供應管道和供熱供應管道時對其施工時間和施工安全的要求非常高。采用全焊接球閥，可以直執著深埋地下。利用工程技術方法施工能zui大化減少閥門控制所占空間，并且大大節省施工費用及工程時間。而且能預防煤氣爆zha的危險，全焊接球閥是非常安全的閥門。

結構特點-
浮動式,固定式;
防火、抗靜電裝置;
不會有外部泄漏;
特殊端口和通徑,自救閥座;
垂直裝置和加長閥桿;
閥桿能緊急處理油脂;
閥座潤滑劑和緊急密封劑設備;
一體式焊接球閥，不會有外部泄漏等到現象;
閥坐是碳纖維增強特氟隆密封環及蝶形簧構成的，所以對壓力和溫度和變化適應能;
在標準壓力和溫度范圍內不會產生任何泄漏,閥桿轉動自如且密封嚴密;
球體的加工過程有*的計算機檢測儀跟蹤檢測，所以球體的加工精度高;
閥體材料跟管道材質一樣，不會出現應力不均，也不會由于地震及車輛經過地面時而產生變形;
可以直接埋于地下，不用建高大型閥門井，只需在地面上設置小型淺井，大大節省施工費及工程時間;可根據管道的施工及設計要求，調整閥體和長短和閥桿的高度;
球體的加工精度非常精密，操作輕便，無不良干涉;

應用范圍-
城市燃氣：燃氣輸出管道、主干線及各支線供應管道等。
集中供熱：大型供熱設備輸出管線、主干線、支線。
熱交換機：管道及各回路啟閉。
鋼鐵廠：各種流體管道、廢氣擇放管道、煤氣和熱力供應管道、燃料供應管道。
各種工業設備：各種熱處理管道、各種工業煤氣和熱力管道。

技術參數-
連接方式:法蘭;
口徑尺寸:1/2-20”;
工作壓力:16-160Bar;。
介質溫度:－20℃-120℃;
閥體材質:WCB、A105;
密封材質:PTFE;
球芯材質:實芯不銹鋼球;
閥桿材質:不銹鋼;
填    料:PTFE;
閥體外表:亞光紫蘭。

American Taylor's imported flanged all-welded ball valve
Product description -
American Taylor's imported flanged all-welded ball valve is very high in construction time and construction safety during construction and maintenance of gas supply pipes and heating supply pipelines. All welded ball valves can be fixed and buried deep underground. Using the latest engineering method to maximize the control space of the valve, and greatly save the construction cost and the engineering time. And can prevent the danger of gas explosion, the all-welded ball valve is a very safe valve.
Structural features -
Floating type, fixed type;
Fire and anti-static devices;
There will be no external leakage;
Special port and size, self-rescue valve seat;
Vertical and extended stem;
The stem can handle grease urgently;
Seat lubricants and emergency sealants;
One-piece welded ball valve, no external leakage.
The valve seat is made of carbon fiber reinforced teflon sealing ring and butterfly spring, so it is suitable for pressure and temperature and change.
No leakage is produced under standard pressure and temperature range. Stem rotation is easy and tight.
The process of the ball has advanced computer detector tracking and detection, so the machining precision of the ball is high.
The body material is the same as the material of the pipe, which will not be unevenly distributed and will not be distorted by the earthquake and the vehicle passing through the ground.
It can be buried directly in the ground without having to build a large valve well. It is only needed to set up small shallow well on the ground to greatly save the construction cost and project time. Adjust body length and stem height according to the construction and design requirements of pipeline;
The machining accuracy of the ball is very precise, easy to operate and no interference.
Application scope -
City gas: gas output pipeline, main line and supply pipeline of each branch.
Central heating: large heat supply equipment output pipeline, trunk line, branch line.
Heat exchanger: pipe and loop open.
Steel works: various kinds of fluid pipelines, exhaust gas selection pipes, gas and thermal supply pipelines, fuel supply pipelines.
Various industrial equipment: various heat treatment pipelines, various industrial gas and thermal piping.
Technical parameters -
Connection mode: flange;
Diameter: 1/2-20.
Working pressure: 16-160bar; .
Medium temperature: - 20 ℃ to 120 ℃;
Body material: WCB, A105;
Sealing material: PTFE;
Ball core material: solid stainless steel ball;
Stem material: stainless steel;
Fill materials: PTFE;
Body appearance: subpurple orchid.