機床商務網
詳細介紹
- 詳細說明
配套鉆孔攻絲機、動力主軸頭使用最多可同時加工五十余孔位安裝快捷,增減方便。 Use of matching drill tapping machine and power spindle head, more than 50 holes can be processed at the same time.Installation is fast, increase or decrease is convenient 1.本體結構利用齒輪箱配合萬向節所組成容易調整加工孔距不受齒輪所限制，節省調整時間也少有死角的限制，適合加工接近圓周分布孔的工作,是可調式中最容易操作使用的規格。為保萬向節頭的壽命,移動范圍不得超過15魔等于垂直之前后左右30mm以內。 2.根據同- -工件牙距不同， 可定制不同轉速比多軸器,確保同時攻不同牙距產品。 3.依據產品圓紙。配合工作之孔距坐標設計齒輪箱結構即定位孔位。 4.主體顏色可選默認為銀灰色。 Main Characteristics: 1. The body structure is composed of garbox and universal joint head. Itis easy to adjust the procossing hole distance without rstrictin of gear, saves adiusing time, and has few dead angle. It is suitable for the work of processing near circular distributed holes. It is the easiest specication to operate in the adjustable mode. In order to ensure the fe of universal joint. the moving range should not exceed 15 degrees, which is equal to about 30 mm before and aifler perpendcularity. 2 Acording to the dferent pitch of the same worlpiece, muli axle machine with dfrent speed ratio can be customized to ensure that dferent pich products are atacked at the same time. 3. Acording to the product drawings and the coordinates of hole spacing. the structure of gearbox is designed to determine the boring position.4. Subject color is oplional, defalt is silver gray. Product Parameters 產品參數
|
機床商務網