機床商務網
詳細介紹
6GK1551-2AA00 西門子代理商 接口網卡 profibus網卡 西門子通訊處理器 西門子工控通訊網卡 西門子工控通訊卡 西門子工控通訊主板
西門子工控通訊模塊
_______________________
【SIEMENS】
上海施承電氣自動化有限公司
聯 系 人：彭 立 道（銷售工程師）
______________________________________
- II 型 PC 卡（CardBus 32 位），用于將編程器/PC 和帶有 PC 卡插槽的便攜式 PC（CardBus 32 位）連接到 PROFIBUS 和 SIMATIC S7 的 MPI
- 通訊服務：
- PROFIBUS DP 1 類主機，包括帶有擴展 SOFTNET DP 的非循環式 DP
- PROFIBUS DP 2 類主機，包括帶有擴展 SOFTNET DP 的非循環式 DP
- PROFIBUS DP 從站帶有 SOFTNET DP 從站
- 編程器/OP 通訊
- S7 與 SOFTNET-S7 的通訊
- 通過 SOFTNET-DP 或 SOFTNET-S7 進行開放式通訊（基于 FDL 接口的發送/接收）
- 可用于：
- STEP 7 和 NCM PC；（ProTool、Micro/Win、ProTool/Pro、SIMATIC PDM，用于編程器/OP 通訊）
- SOFTNET-S7 (用于 S7 通訊)
- SOFTNET DP，SOFTNET DP 從站（用于 DP）
- 相應的OPC服務器包含在在通訊軟件的供貨范圍內
Benefits
- 將筆記本電腦或者其它便攜式 PC 連接到 PROFIBUS 上（例如，用于診斷和調試）
- 安裝和調試都十分簡單
- 用作 SOFTNET 的優化
- OPC 作為標準接口
- 具有 NCM PC 和 STEP 7 的統一程序和組態功能
Area of application
CP 5512 能將具有 PC 卡插槽（CardBus 32 位）的編程器和便攜式工控機連接到 PROFIBUS 和 SIMATIC S7 的 MPI 多點接口。
Design
- 用于 Cardbus (32 位) 的 PC 卡 II 型
- 用于連接 PROFIBUS 的帶 9 針 D 型連接器的適配器
Functions
CP 5512 可在不同的軟件包下進行操作，并允許用戶通過 PROFI-BUS 和多點接口(MPI)執行編程設備的功能和 PC 函數。
每臺 PG/PC/筆記本電腦上只能使用一個 CP。 每個CP 只能使用一個相同的協議 (PROFIBUS DP， S7 通信或者 FDL)。
下面的軟件包支持 CP 551
2：
- STEP 7 V5.2 and higher;
drivers for the CP 5512 that execute under Windows 2000 Professional and XP Professional are included in the scope of supply of STEP 7. - SOFTNET-S7 V6.1 and higher;
with this package, the S7 programming interface under Windows XP Professional can be used (Windows 2000 Professional from SOFTNET-S7 V6.1 SP1 upwards). - SOFTNET-DP V6.1 and higher;
the CP 5512 can be used as a PROFIBUS DP Master Class 1 or 2 under Windows XP Professional (Windows 2000 Professional from SOFTNET-DP V6.1 SP1 upwards). - SOFTNET-DP slave V6.1 and higher;
for using the CP 5512 as a PROFIBUS DP slave under Windows XP Professional (Windows 2000 Professional from SOFTNET-DP slave V6.1 SP1 upwards). - STEP 7-Micro/WIN V3.2 SP4 and higher;
hardware basis for the programming software of the SIMATIC S7-200 programmable controller. - ProTool, ProTool/Pro V6.0 SP2;
the CP 5512 can be used as a hardware basis for the configuration tool for SIMATIC Operator Panels, Touch Panels and Text Displays. - NCM PC V5.2 and higher;
under Windows XP Professional - SIMATIC PDM;
drivers for the CP 5512 that execute under Windows 2000 Professional and XP Professional are included in the scope of supply of SIMATIC PDM.
Technical Specifications
Order number | 6GK1551-2AA00 | |
|---|---|---|
Product type designation | CP 5512 | |
Transmission rate | ||
Transfer rate | ||
| 9.6 kbit/s ... 12 Mbit/s | |
Interfaces | ||
Number of electrical connections | ||
| 1 | |
Type of electrical connection | ||
| 9-pin Sub-D socket (RS 485) | |
Supply voltage, current consumption, power loss | ||
Type of voltage of the supply voltage | DC | |
Supply voltage | ||
| 3.3 V | |
Relative symmetrical tolerance for DC | ||
| 5 % | |
Consumed current | ||
| 0.52 A | |
Active power loss | 1.8 W | |
Permitted ambient conditions | ||
Ambient temperature | ||
| 5 ... 45 °C | |
| -20 ... +60 °C | |
| -20 ... +60 °C | |
Relative humidity at 25 °C without condensation during operation maximum | 95 % | |
Protection class IP | IP00 | |
Design, dimensions and weight | ||
Module format | PC card Type II CardBus (32 bit) | |
Width | 86 mm | |
Height | 5 mm | |
Depth | 54 mm | |
Net weight | 130 g | |
Number of plug-in cards of same design plug-in per PC station | 1 | |
Number of units Note | - | |
Performance data | ||
Performance data open communication | ||
Software for open communication by means of SEND/RECEIVE required | Yes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB S7 | |
Number of possible connections for open communication by means of SEND/RECEIVE maximum | 50 | |
Performance data PROFIBUS DP | ||
Software for DP master function required | Yes, SOFTNET-PB DP | |
Service as DP master | ||
| Yes | |
| No | |
| No | |
Number of DP slaves on DP master usable | 64 | |
Amount of data | ||
| 7 808 byte | |
| 7 808 byte | |
| 244 byte | |
| 244 byte | |
| 244 byte | |
Software for DP slave function required | Yes, SOFTNET-PB DP slave | |
Service as DP slave | ||
| Yes | |
| No | |
Amount of data | ||
| 122 byte | |
| 122 byte | |
Performance data S7 communication | ||
Software for S7 communication required | Yes, SOFTNET-PB S7 | |
Number of possible connections for S7/PG communication maximum | 8 | |
Performance data multi-protocol mode | ||
Number of configurable connections per PC station | 207 | |
Product functions management, configuration | ||
Configuration software required | Included in the scope of delivery of the required software product | |
Product functions Diagnosis | ||
Product function | ||
| Yes | |
Standards, specifications, approvals | ||
Standard | ||
| 2004/108/EC | |
| CAN/CSA C22.2 & UL 60950-1 | |
| EN 61000-6-3, EN 61000-6-4 | |
| EN 61000-6-1, EN 61000-6-2 | |
Certificate of suitability | ||
| Yes | |
| Yes | |
機床商務網