機床商務網(wǎng)
技術文章
Milling machine operation
閱讀：630 發(fā)布時間：2015-7-24Gantry milling machine gantry milling for short, is a door frame and horizontal milling machine lathe bed. Gantry milling machine can be used more than the milling processing surface at the same time, the machining accuracy and production efficiency are high, suitable for batch and mass production of large workpieces in plane and slope. CNC gantry milling machine can also be processing space curved surface and some special parts.
Operating procedures
1. Work with a clamp, screw or special tool clamping. Use wrench generally is allowed to add sleeve to avoid slippage cuts.
2. The cutting tool must be clipped on, otherwise you are not allowed to drive to work.
3. Before starting work, want to check the operation condition of transmission machine parts, and damper installed machine tools, to operate.
4. Milling all kinds of artifacts, especially when the rough milling, start cutting should be slow.
5. When moving workbench and rest, should loosen the set screw.
6. Loading and unloading tools, should use copper hammer or tap mallet, prevent tool debris flying out of cuts.
7. In the cutting, are not allowed to change