產品介紹：

香港志強牌*磨刀機,具有磨削精度高、安裝方便、造型美觀、結構新穎,各轉動部位靈活，噪音低、振動小，刀架部分帶軸承，耐用、耐磨、操作方便等特點，專門設計用于刃磨刻模銑床、刻字機、刻線機、電腦雕刻機.打標機等各種直徑、形狀、角度的雕刻尖刀、端銑刀、刻刀和按刻模比例相應的靠模銷。因此它是機械加工及雕刻行業*刃磨的*的配套設備。

Omnipotent knife sharping of strong Hong Kong aspiration plate machine, have grinding accuracy is high , installation is convenient , attractive appearance , structure are new and original , every turns location nimbly , noise is low , vibration is small , the tool carrier part brings axle bearing along, characteristics such as durable , able to endure , handling to go to the lavatory , machine , dividing machine , computer sculpturing machine specially, designing that the mill carves the model milling machine being used for edge , carving characters on a seal. Since bid machine waits for the various diameter , form , angle, carve the sharp knife , end milling cutter , graver and report back after according to carving corresponding model proportion explorator. It is machine work and the corollary equipment carving must prepare for that the industry cutter edge grinds therefore. 

標準配置： 

注：可選購以下磨刀機配件規格.

⒈磨刀機嗦咀（夾頭）規格：

公制—Φ3、Φ4、Φ5、Φ6、Φ8、Φ10、Φ12、Φ14、Φ16mm；

英制—1/8″、3/16″、1/4″、5/16″、3/8″、1/2″、5/8″、3/4″、7/8″、1-1-1/8″。⒉砂輪種類和粒度：

白玉鋼砂輪： 80#、120#；

金鋼石砂輪：100#、150#、320#、600#；

樹脂砂輪：150#、180#、320#、400#、800#、1000#、1200#。

⒊預先訂貨說明夾頭公制或英制規格和數量，其中Φ3至Φ12mm（或1/8″至1/2″）為通孔，Φ16mm（或5/8″）夾持長度為50mm。