CW6180 CW61100系列車床適用于車削內外圓柱面、圓錐面及其他旋轉零件，可加工各種常用的公制、英制、模數和徑節螺紋，并能拉削油溝和鍵槽。本系列車床還有以下特點：

1.     床身采用整體鑄造結構式床身，內部筋板布局合理，有較高的剛性，導軌采用中頻淬火磨削工藝。機床剛性高，精度穩定，能進行強力切削。

2.       溜板設有快移結構，用單手柄形象化操作；主軸正反轉變向及剎車用戶可選擇液壓控制或手動機械控制。

3.       床鞍導軌粘貼‘TSF’軟帶耐磨材料。

4.       可用上刀架單獨機動車削圓柱面，還可以用上刀架與縱向進給配合車削長圓錐面。

CW6180 CW61100 parallel lathe are suitable for turning internal and external cylindrical,conical and swing surfaces as well as various metric,inch,module and diametric pitch threads.They can also be used for broaching oil grooves and keyways. There are also following reatures:

1.       Casted in whole piece,box type internal structure,of high rigidity ,with hardened guideway. The rigidity is high. The precison is stable.And these lathes can carry out strong force cutting.

2.       On apron , there is a device, operated by a single lever, used for rapid traverse of the carriage. Spindle’s braking and rotating direction change is controlled by hydraulic system, or by hand operation, all to user’s choice.

3.       The saddle guideway is glued by “TSF” soft belt wear resisting materials.

4.       The top slide can be used independently for turning of short cone, in combination with longitudinal feeding, it can also turn long taper surface.