本磨床主要是用砂輪周邊磨削鋼料、鑄鐵及有色金屬等各種材料。根據工件材料、形狀，可采用不同的裝夾、定位方法。一般平面，可以采用電磁吸盤或直接緊固于工作臺上進行磨削加工；平面、直角面、任意角度、圓柱端面及其它一些特殊形狀，可在夾具或多功能強力電磁吸盤上進行磨削加工。
| 規格 standards | 單位 unit | GTS-618M* | GTS-618H | ||
| 能力 capacity | 工作臺工作面積available area of working table | mm | 460*150 | 350*150 | |
| 左右zui大移動量 maximum moving dimension from left to right | mm | 485 | 485 | ||
| 前后zui大移動量maximum moving dimension from front to back | mm | 180 | 180 | ||
| 工作臺面至主軸中心zui大距離maximum distance from surface of working table to spindle | mm | 400 | 400 | ||
| 工作臺zui大承受重量maximum bearing weightof working table | Kgs | 120 | 120 | ||
| 工作臺working table | 工作臺T型槽slot in working table | mmxN | /14*1 | /14*1 | |
| 工作臺速度speed of working table | m/min | / | 3-25 | ||
| 工作臺軌道 | m/min | -V-平滑動導航 | -V-平滑動導航 | ||
| 前后手輪進刀fornt & rea handwheel feed | 一格a check | mm | 0.01 | 0.01 | |
| 1圈a circle | mm | 3 | 3 | ||
| 前后自動進給auto-supplying from front to back | mm | / | / | ||
| 前后快速移動high speed moving from front to back | 50HZ | mm | / | / | |
| 60HZ | mm | / | / | ||
| 砂輪grinding wheel | 砂輪尺寸 measurement of grinding wheel | mm | |||
| 主軸轉速 rotational speed of spindle | 50HZ | R.p.m | 2850 | 2850 | |
| 60HZ | R.p.m | 3410 | 3410 | ||
| 上下結構up and down structure | zui大移動量maximum moving dimension | mm | 330 | 330 | |
| 上下手輪進刀up& down handwheel feed | 一格a check | mm | 0.005 | 0.005 | |
| 1回轉a turing round | mm | 1 | 1 | ||
| 自動進給量auto-supplying volumn | mm | / | / | ||
| 上下快速移動量 high-speed moving dimension from up to down | m/min | ||||
| 馬達motor | 主軸馬達spindle motor | HXP | 1*2 | 1*2 | |
| 油壓馬達oil pressure motor | HXP | / | / | ||
| 吸塵馬達dust catching motor | HXP | 1/2*1 | 1/2*1 | ||
| 沖水馬達water catching motor | HXP | 1/8*1 | 1/8*1 | ||
| 尺寸dimension | 機器高度machine height | mm | 1650 | 1650 | |
| 占地面積 covering area | mm | 1800*1200 | 1800*1200 | ||
| 凈重 net weight | kgs | 700 | 700 | ||
| 毛重 gross weight | kgs | 850 | 850 | ||
