D707焊條 符合 GBEDW-A-15
說明及用途(Function performance and application)
低氫鈉型堆焊耐巖石強烈磨損零件,如挖泥機葉片等。
熔敷金屬主要成分(%)(Typical composition of deposited metal)
C | Si | Mn | W |
2.00 | ≤4.00 | ≤2.00 | 45.0 |
堆焊層硬度(Typical mechanical properties of deposited metal)
HRC |
60 |
參考焊接規范(Welding parameter)
焊條直徑(mm) | 3.2 | 4.0 | 5.0 |
焊接電流(A) | 70~120 | 140~160 | 180~220 |
注意事項(Note)
1.堆焊件為碳鋼時預熱溫度在300℃以上。堆焊件為低合金鋼時預熱溫度400~500℃。堆焊件為不銹鋼時為600~650℃。
2.低合金鋼及不銹鋼焊后須經300℃退火。
3.焊前焊條須經300~350℃燒焙1h。
D707焊條、堆焊焊條、閥門堆焊焊條、D707閥門焊條