| 床身上zui大回轉直徑 | Swing over bed | 1640 mm | ||
| 刀架上zui大回轉直徑 | Swing over carriage | 1250 mm | ||
| zui大工件長度 | Maximum length of workpiece | 1500/3000/5000/6000/8000/10000/12000 mm | ||
| zui大車削長度 | Maximum turning length | 1300/2800/4800/5800/7800/9800/11800 mm | ||
| 床身導軌寬度 | Span of guideway | 755 mm | ||
| 主軸端部代號 | Spindle nose | A215（8XM22） | ||
| 主軸通孔直徑 | Spindle bore | 130 mm | ||
| 主軸前端錐孔 | Taper hole of spindle | 1:20/140 | ||
| 主軸正轉時的轉速種數 | Number of for ward turning speeds | 21 | ||
| 主軸反轉時的轉速種數 | Number of reverse turning speeds | 12 | ||
| 主軸轉速范Spindle speed | 正轉 | Forward | 3.15-315 r/min | |
| 反轉 | Reverse | 3.5-291 r/min | ||
| 主軸每轉刀架的縱橫進給量種數 | Number of feeds per revolution （longitudinal/transeverse） | 56/56 | ||
| 主軸每轉刀架的進給量范圍Feed per revolution | 縱向 | Longitudinal | 0.1-12（0.004″-0.473″） mm | |
| 橫向 | Transeverse | 0.05-6（0.002″-0.236″） mm | ||
| 上刀架 | Upper tool-post | 0.025-3（0.001″-0.118″） mm | ||
| 公制螺紋種數范圍 | Number and range of metric thread | 44:1-120mm | ||
| 英制螺紋種數范圍 | Number and range of inch thread | 31:28-1/4″ | ||
| 模數螺紋種數范圍 | Number and range of module thread | 45:0.5-60mm | ||
| 徑節螺紋種數范圍 | Number and range of diametrical pitch thread | 38:1/2-56DP | ||
| 主軸中心至*安裝基面的垂直距離 | Distance between spindle center-line and rool resting plane | 48 mm | ||
| *截面 | Section of tool shank | □45 mm | ||
| 刀架回轉角度 | Tool post swing range | ±90° | ||
| 床鞍的zui大行程 | Maximum travel of carriage | 1450/2950/4950/5950/7950/9950/11950mm | ||
| 上刀架的zui大行程 | Maximum travel of top slide | 300 | ||
| 下刀架的zui大橫向行程 | Maximum travel of cross slide | 630（24″） | ||
| 上下刀架刻度盤每轉一格時刀架行程 | Tool post travel per turn of the dials of top or cross slide | 0.005（0.002″） | ||
