◇ 全鋼焊接結構,振動消除應力,機器強度高,剛性好.
◇ 液壓上傳動,平穩可靠.
◇ 機械擋快,扭軸同步,精度高.
◇ 后檔料采用產品NJDK-4A數控系統,上滑塊行程電動調節,手動微調,數字顯示.
◇ 上模配有撓度補償機構,4米以上采用下工作臺液壓補償機構.
Performance
◇ The frame is steel-welded construction,vibration to eliminate stress,with high strength and good rigidity.
◇ Forcing-torsion bar maintains synchronization for the two pistons ,with the higher parallelism to the table.
◇ Mechanical stop must ensure stable and reliable positioning accuracy.
◇ The ram is adopted hydraulic top-drive with two cylinders. Working pressure is stepless control and the time of retaining pressure can be easily adjusted by turning the knob,lower noise.
◇ The ram"s stroke and the back gauge"s position can be speedily adjusted by motor and fine adjusted by handwheel.
◇ The adjusted value is displayed on the numerator.
◇ Ram possesses three strokes i.e. inching, sing
le ,continuity
◇ The main sliding pairs such as oil cylinders,piston rods, guide ways and etc.are all treated with wear-resisting measures.
◇ Heat-treated tooling is with the wearablilty. The satisfactory bending accuracy can be obtained through adjusting of deflection compensation unit of the slanting wedge installed on the top of the tooling.
◇ Crowned bottom die holder for deflection compensating is adopted for the machines above 4 rice.
◇ Full machine is guarded with safety interlocker that is set in the electric box by automatic cutting off main power when the box door is opened.protecting barrier with safety interlocker is mounted on the back of the machine. Another, there are travel limit and foot pedestal mounted emergency off switch.
Optional:
◇ Sectional tooling with different lengths may store forming a certain length to bend the closed frame workpiece.
◇ The adjusted value of the ram and the back gsuge can be displayed by digital readout (electronic displays).
◇ Pendant control box.
◇ Two-hand control device.
◇ Photo-electricity protection(infra-red light sensor to monitor load area).
◇ Any tailor-made are available on request.
