■特點:
☆?yuàn)A持弧面按工件要求可隨機配車或配磨。
☆連接剛性強,夾持精度高。
☆?yuàn)A持直徑的調整主要靠更換卡爪實現,尤其適用于加工大批量零件
■K51TB、K51B、K51FB
規格D Size | L | L1 | B | H | a | b | e | t | t1 | z-d | 凈重Kg Net WT. |
160 | 70 | 18 | 35 | 42 | 11 | 11 | 14 | 5 | 1.5 | 2-9 | 11 |
200 | 86 | 20 | 40 | 50 | 13 | 13 | 16 | 6 | 2 | 2-11 | 20 |
250 | 105 | 25 | 45 | 58 | 15 | 15 | 20 | 7 | 2.5 | 2-13 | 31 |
320 | 130 | 28 | 50 | 69 | 18 | 18 | 22.5 | 8 | 3 | 2-15 | 53 |
400 | 160 | 40 | 50 | 80 | 20 | 20 | 30 | 9 | 3.5 | 2-17 | 83 |
500 | 190 | 56 | 55 | 85 | 22 | 22 | 39 | 9 | 3.5 | 2-19 | 134 |
630 | 235 | 76 | 60 | 100 | 24 | 24 | 50 | 10 | 4 | 2-22 | — |
■K51TC、K51C、K51FC
■特點:
☆?yuàn)A持弧面按工件要求可隨機配車或配磨。
☆調整梳齒可改變夾持直徑。
☆?yuàn)A持精度高。
■Specificity:
☆The clamping arc can be turned or ground as the request of the workpieces.
☆Changing the clamping diameter by adjusting the serrations.
☆With high clamping accuracy.
規格 Size | L | B | B | H | e | s | t | t1 | z-d |
160 | 70 | 35 | 13 | 42 | 20 | 1.5×90° | 4.5 | 4 | 2-11 |
200 | 82 | 40 | 16 | 46 | 24 | 1.5×90° | 4.5 | 4 | 2-13 |
250 | 95 | 45 | 17 | 50 | 28 | 1.5×90° | 4.5 | 4 | 2-13 |
320 | 118 | 50 | 21 | 62 | 32 | 2.5×90° | 4.5 | 4 | 2-17 |
400 | 140 | 50 | 20 | 75 | 45 | 2.5×90° | 6 | 5.5 | 2-17 |
500 | 160 | 55 | 22 | 85 | 50 | 2.5×90° | 6 | 5.5 | 2-17 |
630 | 190 | 60 | 26 | 100 | 55 | 2.5×90° | 6 | 5.5 | 2-22 |