臺式車床BB25-500/700
| ||||||||||||||
| 該車床具有縱向機動進給機構，采用掛輪系，交換齒輪可得到兩種機動縱向進給量，用于車削內外圓柱表面，圓錐表面。利用上述機構交換齒輪和使用開合螺母能加工常用的公英制模數螺紋。主軸端有4號莫氏錐孔，軸端法蘭安裝連接卡盤，尾座滑套具有莫氏2號錐孔，可安裝鉸刀、鉆夾頭、絲錐、板牙等*進行攻絲、鉆孔、鉸孔、拉油槽等操作。 車削時，機床的主軸轉動是由裝在床身背后的電機通過皮帶驅動全齒輪主軸箱，按照變速操作手柄位置板動手柄，主軸可得到六種轉速。范圍為115-1620rpm,利用開關使電機反轉，主軸可得到六種反轉速度。因此本機床具有較齊全的車削加工功能，性能良好。 本機床適用于小型機械修配、加工，特別適用于家庭、科研實驗室及教學. | ||||||||||||||
| 技術參數 Specifications | ||
| Model | BB25-500 | BB25-700 |
| 中心高Height of spindle centers | 125mm | 125mm |
| 床身上zui大回轉直徑Max swing diameter over bed | 250mm | 250mm |
| zui大工件長度Max length of workpiece | 500mm | 700mm |
| zui大切削長度Max. length cutting | 450mm | 660mm |
| 刀架上zui大回轉直徑Max workpiece diameter over carriage | 130mm | 130mm |
| 主軸通孔直徑Spindle bore | 27mm | |
| 主軸錐孔Taper of hole in spindle | Morse No.4 | |
| 主軸轉速級數Number of spindle rotating speed | 6 steps | |
| 主軸轉速Range of spindle speeds （forward-revere） | 115-1620r.p.m. | |
| 主軸每轉進給量Range carriage/Number of longitudinalfeed | 0.05-0.3mm/r/4 | |
| 公制螺紋種數Number of metric screw thread | 20 kinds | |
| 公制螺紋螺紋螺距范圍Metricscrew thread range | 0.2-3.5mm | |
| 英制螺紋種數Number of inch screw thread | 20 kinds | |
| 英制螺紋螺紋螺距范圍Inch screw thread range | 8-56t.p.i. | |
| Number of model screw thread | 10 kinds | |
| Model screw thread range | 0.2-1.25 | |
| Range carriage/Number of longitudinal feed | 0.05,0.1mm/2 | |
| 主軸中心線距*基面距離Dis. spindle center to bottom of square head | 15mm | |
| 刀架zui大轉動角度 Max. swivel angulity of tool slide | ±45° | |
| Travel of every screw division of cross slide | 0.04mm | |
| Travel of every screw division of rool slide | 0.04mm | |
| 小刀架zui大行程 Max. longitudinal travel of tool slide | 70mm | |
| 刀架橫向zui大行程 Max. transverse travel of cross slide | 115mm | |
| 尾座套筒錐度 Taper of the hole in tailstock | Morse No.2 | |
| 尾座套筒zui大行程 Max. travel of tailstock sleeve | 70mm | |
| 電機 Motor | 550W 220VAC/380VAC 50Hz | |
| 外形尺寸（長×寬×高） Overall dimensions （ L×W×H ） | 1250×540×400mm | |
| 凈重 Net weight | 115/145Kg | |
