Mould Temperature Controller
Product Details:
Place of Origin China (Mainland)
Model Number O
Theory Temperature Controller
application control the temp. of mold
function control temperature
Payment & Shipping Terms:
Price: Get Latest Price
Minimum Order Quantity: Negotiable Trial Order
Minimum Order Quantity: 1 Piece/PiecesTrial Order
Port: Guangzhou China
Packaging Details: Wooden crate
Delivery Time: about 20 days
Payment Terms: L/C,T/T
Supply Ability: 200 Set/Sets per Day
Detailed Product Description
PID adopted to control the temperature, keeping long time constant temperature, high efficiency and energy saving.
1. PID adopted ,accurate temperature control, keeping the error within -0.5---+0.5 degree
2. Dual digital display shows the actual temperature and the set temperature.
3.Six protective measures; alarm for thermocouple open circuit, phase fault protect, pump protect, overheat protect, ail shortage protect.
4. Microcomputer chip control panel, visual and easy to operate, easy to maintain
5. Oil type mould templ controller.
SPECIFICATION;DHTW系列水式模溫機技術參數表
機型/單位 Model / Units | W-6 | W-9 | W-12 | W-18 | W-24 | ||
溫控范圍 (℃) Temperature range | 30-120℃ | ||||||
溫控精度(℃) Accuracty of temp.control | ±1℃ | ||||||
電源 (V)Power supply | AC220V/3φ380V50HZ/60HZ | ||||||
傳 熱 媒 體 Medium | 水Water | ||||||
冷卻方式 Cooling method | 直接冷卻DIRECT COOLING/ 間接冷卻(板式熱交換器) INDIRECT COOLING | ||||||
加熱能量(KW)Heating capacity | 6 | 9 | 12 | 18 | 24 | ||
泵浦馬力(KW/HP)Pump horsepower | 0.37/0.5 | 0.75/1 | 1.5 /2 | 0.75/1 | 1.5 /2 | 1.5 /2 | 2.25 /3 |
zui大泵流量/ 壓力(L/MIN/ KG/CM2)Pump max.flow pressure(50HZ/60HZ) | 35L/min 2.6kg/c㎡ | 45L/min 2.6kg/c㎡ | 145L/min 2.6kg/c㎡ | 45L/min 2.6kg/c㎡ | 145L/min 2.6kg/c㎡ | 145L/min 2.6kg/c㎡ | 165L/min 3.0kg/c㎡ |
45L/min 2.6kg/c㎡ | 58L/min 2.6kg/c㎡ | 180L/min 2.6kg/c㎡ | 58L/min 2.6kg/c㎡ | 180L/min 2.6kg/c㎡ | 180L/min 2.6kg/c㎡ | 205L/min 3.0kg/c㎡ | |
冷卻入水壓力(KG/CM2)Cooling into the water pressure | 2 | ||||||
zui大電力消耗 (KW)Maximumpowerconsumption | 6.5 | 9.5 | 10.5 | 12.75 | 13.5 | 19.5 | 26.25 |
冷卻水配管(INCH)Cooling water pipe | 1/2’’PT | ||||||
循環水配管 (INCH)Circulating water piping | 2進2出至1/4’PT | 4進4出至3/8’’PT或1進1出至1’’PT | |||||
外型尺寸(CM)Dimensions L*W*H | 61*25*50 | 64*29*59 | 76*30*60 | 64*29*60 | 76*30*60 | 76*30*60 | 95*46*93 |
凈重(KG)Weight | 35 | 45 | 55 | 70 | 75 | 80 | 85 |
模溫機選型參考
成型鎖模能力(T) | 成型能力(Kg/Hr) | 泵浦流量(L/min) |
50以下 | 6以下 | 30 |
50~100 | 6~12 | 30 |
100~200 | 12~25 | 35 |
200~300 | 25~40 | 45~50 |
300~650 | 40~80 | 65 |
650以上 | 80以上 | 100 |
加工不同塑料所需要的模具溫度
塑料模化合物 | 簡要描述 | 模具溫度 ℃ |
Plastic moulding compound | Short description | Mould wall temp in ℃ |
聚乙烯,高密度/Polyethylene ,high density | HDPE | 10 - 40 |
聚乙烯,中密度/Polyethylene ,medium density | LDPE | 10 - 40 |
聚丙烯/Polyepropylene | PP | 10 - 50 |
聚苯乙烯/Polystyrene | PS | 10 - 60 |
液晶聚合物/Liquid crystal Polymers | LCP | 30 - 150 |
聚氯乙烯/Polyvinyl chloride | PVC | 40 - 60 |
聚酰胺/Polyamid | PA | 40 - 60 |
丙烯腈-丁二烯苯乙烯-丙烯腈 Acrylonitrile-butadienestyrene-acrylonitrile | ABS | 40 - 70 |
苯乙烯-苯乙烯共聚物/Styrol-Acrylnitril | SAN | 40 - 70 |
聚甲基丙烯酸甲酯/ Polymenthylmethacrylate | PMMA | 50 - 80 |
聚酰胺6.6/ Polymide 6.6 | PA6.6 | 60 - 120 |
聚對苯二甲酸丁二醇酯/Polyethylene terephthalate | PET | 60 - 140 |
聚酰胺6 /Polyamide 6 | PA 6 | 70 - 90 |
聚對苯二甲酸丁二酯/Polybutylene terephthalate | PBTP | 70 - 140 |
聚丁烯氧化物/ Polyphenylene oxide | PPO | 70 - 150 |
聚砜 / Polysulphone | PSU | 70 - 190 |
聚甲醛 / Polyoxymethylene | POM | 80 - 120 |
聚碳酸酯 / Polycarbonate | PC | 80 - 150 |
聚亞苯基硫化物 / Polyphenylene sulphide | PPS | 80 - 180 |
聚醚酰亞胺 / Polyether imide | PEI | 90 - 180 |
聚亞苯基sul fon / Polyhenylensulfon | PPSU | 100 - 170 |
聚醚砜 / Polyther sulphone | PES | 120 - 190 |
聚醚醚酮 / Polyetheretherketone | PEEK | 160 - 18 |