產品特點
1.液壓機C型機身設計，占用空間小，方便操作。
2.液壓機機身整體鑄造，剛性好，性能穩(wěn)定。
3.液壓機配有充液閥，動作速度快。
4.液壓機加長工作臺，利于工件的安裝放置。
5.液壓機下壓行程具有快進與工進兩種速度，快進提高工作效率；工進速度可任意調節(jié)，保護模具，提高質量。
6.按鍵與腳踏兩種循環(huán)啟動方式，任意調整下壓速度與時間。
7.安全設計，采用雙手操作，設有緊急停止按鈕及上下點動功能。
8.液壓機廣泛用于零部件的壓型、壓彎、沖孔、壓印，及軸類零件的校正和壓裝等。
Product feature
1.The C-bodydesign, Use of small space and easy to operate.
2. Whole body cast, rigid, and stable performance.
3. With a filling valve, have a high speed.
4. Extension working table, placing the installation of the workpiececonveniently.
5. Downward movement with the fast and Feeding speed，the fast forward improve work efficiency；feeding speeds can be adjusted to protect the mold, improve product quality.
6. Key and Foot Switch two cycle start mode.
7. Safety designed,using both hands to operate, with emergency stop button and jog up and down function.
8. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
技術參數 Technical parameters
| Specifications | 規(guī) 格 | 單 位 | FBY--KT35 |
| Theoretical output pressure | 理論出力 | KN | 350（35t） |
| Rated oil pressure | 額定油壓 | Mpa | 17.5 |
| Max stroke | zui大行程 | mm | 270 |
| Max Opening Height | zui大開口高度 | mm | 550 |
| Throat depth | 喉深 | mm | 280 |
| Fast-forward speed | 快進速度 | mm/s | 180 |
| Feeding speed | 工進速度 | mm/s | 35 |
| Return speed | 回程速度 | mm/s | 120 |
| The size of the working table | 工作臺尺寸 | mm | 1200×540 |
| The height of the working table | 工作臺距地面高度 | mm | 720（870） |
| Size of the mold mounting hole | 模柄尺寸 | mm | Ф40 |
| Power of motor | 電機功率 | kW | 5.5 |
| Power（3ΦAC,50Hz） | 電源（3ΦAC,50Hz） | V | 380 |
| Weight | 重量 | kg | 2200 |
