德國 HASKEL 液壓泵 dyz
德國 HASKEL 液壓泵 dyz
壓縮介質
Petroleum base oils, Kerosene, Diesel fuel, with 5% soluble oil.
Plain Water.
Most phosphate Ester base fire resistant hydraulic fluids:e.g., Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosate 1120 and Petroleum base solvents compatible with UHMWPE (Ultrahigh Molecular Weight Polyethylene) dynamic, and Viton static seals.
Petroleum base solvents,e.g., Boron fuels, Aromatic hydrocarbons( Benzene ,Toluene Xylene, Hylene, etc.);Chlorinated solvents (Trichloroethylene, Carbon Tetrachloride,? Chlorobenzene ,etc.); Mecaptans, Dowtherm A, Fluoronated solents(Fluorobenzene, Fluorochloroethylene ,etc.); Dowtherm E, plus all of group 3 plus some mildly corrosive acids compatible with wetted materials.
See note (5A) for service with Methyl-Ethy-Ketone, Methyl Acetone, Diacetone, Alcohol and Freon 22Skydrol and Aerosafe hydraulic fluid. Acetone and some alcohols (Ethy, Methy and isopropyl).Also suitable for these fluid if viton static seals replaced with EPR, specify modification number 51331(no extra change),e.g..5133-MDTV-5.(Most Phosphate Estar base fluids solidify at approximately 206 MPa .)
Deionized water.
NOTE: a) Dynamic seal life with non-lubricating fluids will understandably be less than with lubricating type.
b) Consult factory for additional chemical resistance data.
HASKEL 1/3HP PUMP 【1/3馬力（0.25Kw）haskel液體增壓泵系列】
| 型號 | 序號 | 壓縮比 （增壓比） | 較高輸出壓力 | 排量/循環(huán) | ||
| MODEL | RATIO DASH NO. | ACTUAL AREA RATIO | MAXIMUM RATED OUTPUT PRESSURE | DISPLACE MENT /CYCLE | ||
| CONTINUOUS (連續(xù)輸出)MPa | INTERMITTENT （間歇輸出）MPa | |||||
| M,MDTV,MDSTV | -5 | -5.6 | 4.3 | 4.3 | 0.83 | 13.6 |
| M, MS | -7 | 7.8 | 6.2 | 6.2 | 0.60 | 9.8 |
| -12 | 14 | 10.3 | 10.3 | 0.36 | 5.9 | |
| M,MS,MCPV, 29723 (1) | -21 | 25 | 17.9 | 17.9 | 0.20 | 3.3 |
| -36 | 41 | 31 | 31 | 0.12 | 2.0 | |
| -71 | 82 | 60.7 | 60.7 | .060 | 1.0 | |
| -110 | 126 | 93.1 | 93.1 | .039 | 0.6 | |
| M, MS (1) | -188 | 217 | 103.4 | 103.4 | .023 | 0.4 |
Maximum intermittent pressure for stainless steel in MS, 29723 and MCPV series pumps is 69MPa
2. 較高驅動氣壓力0.85MPa( Maximum drive pressure0.85MPa)
| 型號 | 服務介質 | 材質 | 非金屬材質 | |
| MODE | SERVICES | WETTED MATERIALS | NON METALLICS | |
| 泵部分 PUMP SECTION | 活塞部分 PLUNGERS | |||
| M | [1] | Cad plated steel,luminum & SS | 416 SS | Urethane, PTEF,Buna |
| MS | [1][2] | All SS | 316 SS | UHMWPE, PTEE, Buna |
| MDTV | [1][3][5] | Separtion-Aluminum & SS | 416 SS | PTFE, Viton |
| MDSTV | [1][2][3][4][5] | Separtion - All SS | 416 SS | PTFE, Viton |
| MCPV | [1][2][3][4][5] | Separtion - All SS | 15.5PH SS | PTFE, Viton |
| 29723 | [1][2][3][5][6] | Separtion - All SS | Hard Chrome Plated 15.5PH SS + Dichronite | UHMWPE, PTFE, Ryton |
