采工件端面夾持，防止工件夾持變形，適合薄壁工件加工。
夾持補償機構，可夾持股規則斷面之工件。
夾頭中心可裝設工件密著確認裝置。
Prevent deformation of workpiece for gripping the terminal surface,suitable for thin workpiece process.
The compensating mechanism of gripping that can grasp the workpieces of the irregular surface.
Additional check device able to install in the center of chuck.
尺寸單位/Size unit: mm
| 規格 Spec 型號 Model | 楔心行程 Plunger stroke mm | 爪行程直徑 Jaw stroke Dia. mm | 夾持直徑 Max chucking Dia. mm | 最小夾持直徑 Min chucking Dia. mm | 容許油壓缸推力 Max.D.B.Pull KN(kgf) |
|---|---|---|---|---|---|
| 2J-05 | 12 | 8 | 53 | 25 | 5.0(510) |
| 2J-06 | 12 | 8 | 79 | 55 | 6.0(512) |
| 2J-08 | 12 | 8 | 106 | 75 | 12.0(1224) |
| 2J-10 | 12 | 8 | 150 | 119 | 12.0(1224) |
| 2J-12 | 12 | 8 | 200 | 169 | 12.0(1224) |
| 規格 Spec 型號 Model | 夾持力 Max clamping force KN(kgf) | 轉速 Max RPM | 慣性矩 I kg*m2 | 重量 Weight kg | 適合油壓缸 Matched cylinders | 使用壓力 Max Pressure Mpa(kgf) |
|---|---|---|---|---|---|---|
| 2J-05 | 4.0(408) | 4000 | 0.015 | 9 | S-100R/SNK-100 | 0.7(7) |
| 2J-06 | 5.0(510) | 4000 | 0.035 | 9.8 | S-100R/SNK-100 | 0.8(8) |
| 2J-08 | 11.0(1122) | 3500 | 0.12 | 20.3 | S-100R/SNK-100 | 1.7(17) |
| 2J-10 | 11.0(1122) | 3500 | 0.28 | 30.7 | S-100R/SNK-100 | 1.7(17) |
| 2J-12 | 11.0(1122) | 3000 | 0.52 | 41.2 | S-100R/SNK-100 | 1.7(17) |
| 規格 Spec 型號 Model | A | B | C | D | F | G Max | G Min | J | J1 | K |
|---|---|---|---|---|---|---|---|---|---|---|
| 2J-05 | 135 | 86 | 110 | 82.6 | 40 | 75 | 55 | 25 | 10 | M12×1.75 |
| 2J-06 | 165 | 86 | 140 | 104.8 | 45 | 75 | 55 | 28 | 14 | M16×2 |
| 2J-08 | 210 | 90 | 170 | 133.4 | 56 | 80 | 60 | 38 | 16 | M20×2.5 |
| 2J-10 | 254 | 95 | 220 | 171.4 | 56 | 75 | 55 | 38 | 16 | M20×2.5 |
| 2J-12 | 304 | 95 | 220 | 171.4 | 56 | 75 | 55 | 38 | 16 | M20×2.5 |
| 規格 Spec 型號 Model | L | L1 | M Max | M Min | N | P | Q | R | S | T | U |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2J-05 | M10 | 15 | 56 | 36 | 20 | M10 | 42.5 | 27 | 4-M6 | 50 | 30° |
| 2J-06 | M10 | 15 | 56 | 36 | 20 | M10 | 57.5 | 40 | 4-M8 | 64 | 50° |
| 2J-08 | M12 | 18 | 71 | 51 | 25 | M12 | 77.5 | 53.5 | 6-M8 | 104 | 50° |
| 2J-10 | M16 | 24 | 71 | 51 | 25 | M12 | 99.5 | 75.5 | 6-M8 | 140 | 50° |
| 2J-12 | M16 | 24 | 71 | 51 | 25 | M12 | 124.5 | 100.5 | 6-M8 | 190 | 50° |
