型號 | Model | ZX7150A鉆銑床 | ZX7150A鉆銑床 |
攻絲直徑 | Tapping the largest diameter | 45mm | 45mm |
鉆孔直徑 | Maximum drilling diameter | 50mm | 50mm |
端銑直徑 | Maximum milling diameter | 125mm | 125mm |
主軸中心至立柱的距離 | Distance of spindle center to column | 360mm | 360mm |
主軸端面至工作臺面距離 | Spindle nose to table distance | 最小180mm 600mm | Minimum 180mm maximum600mm |
主軸行程 | Spindle travel | 200mm | 200mm |
主軸錐孔 | Spindle taper hole | MT4 | MT4 |
主軸箱升降行程 | Spindle box lift travel | 420mm | 420mm |
主軸箱升降速度 | Vertical speed of the spindle box | 1250mm/min | 1250mm/min |
主軸箱回轉角度 | Maximum turning angle of the spindle box | 正負45度 | Plus or minus 45 degrees |
主軸鉆速范圍 | Spindle drilling speed range | 38-1730r/min | 38-1730r/min |
主軸轉速級數 | Number of spindle speeds | 12 | 12 |
主軸自動進給速度 | Spindle automatic feed rate | 0.1,0.2,0.3mm/r | 0.1,0.2,0.3mm/r |
主軸自動進給級數 | Spindle automatic feed to the series | 3級 | 3 Level |
刻度環每轉進給量 | Scale loop per revolution feed | 102mm | 102mm |
工作臺X向進給級數 | Workbench X to the feed series | 無級 | Stepless |
工作臺X向進給量范圍 | Workbench X to the feed range | 4-480mm/min | 4-480mm/min |
工作臺X向快速移動速度 | Workbench X to the fast-moving speed | 640mm/min | 640mm/min |
工作臺面積 | Table area | 350*1000mm | 350*1000mm |
工作臺X/Y向行程 | Workbench X / Y to travel | 500*350mm | 500*350mm |
工作臺T型槽尺寸 | T-slot table size | 3-14*100mm | 3-14*100mm |
主電機功率 | Power of main motor | 2.2,2.8KW(雙速) | 2.2,2.8 KW (double speed) |
升價電機功率 | Motor power of the price rise | 0.75kw | 0.75kw |
冷卻泵電機功率 | Cooling pump motor power | 0.09kw | 0.09kw |
工作臺走刀器參數 | Workbench tool path parameters | 220v,20nm | 220v,20nm |
機床重量 | Weight of machine | 1300kg | 1300kg |
機床輪廓尺寸 | Maximum outline size of the machine | 1550*1580*2210mm | 1550*1580*2 |