JK0220

兩相混合式步進電機驅動器

2phase hybrid stepper motor driver

概述

JK0220 兩相混合式步進電機驅動器，采用直流12~36V, 交流12~24V供電，適合驅動電壓在直流12~36V,或交流12~24V，電流小于2.0A,外徑在20mm~42mm的混合式步進電機使用。此驅動器采用交流伺服驅動器的電流環進行細分控制，電機低速運行平穩，幾乎沒有震動和噪音。廣泛適合于各類CNC機械，機器人，點鈔機行業。

Descriptions

JK0220 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 12~36V DC or 12~24V AC. suitfor input voltage both for 12~36V AC and12~24V DC, current less 2.0A, diameter from 20mm~42mm 2 phase hybrid stepper motor .this driver that adopts similarto the Circuit of servo control which enables the motor to run smoothly almostwithout noise and vibration. It iswidely used in CNC machine , robots, and money counting and machine.

特點

*平均電流控制，兩相正弦電流輸出

*直流12~36V,交流12~24V供電

*光電隔離信號輸入、輸出

*有過壓-﹑欠壓-﹑過流-﹑相間短路保護功能

*八檔細分和自動半流功能

*八檔輸出相電流設置

*可驅動任何2.0A相電流以下兩相、四相混合式步進電機
*20KHz斬波頻率

Features

*Averagecurrent control,2 phase sinusoidal output current drive

*supplyvoltage from 12VDC~36VDC and 12VAC~24VAC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*8channels subdivision and automatic idle-current reduction

*8channels output phase current setting

*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than2.0A

*20KHzPMW.

性能指標

輸入電壓 直流12~36V, 交流12~24V

輸出電流 0.3A~2.0A

溫 度 工作溫度-10°~45°，存放溫度-20°~125°

環境濕度 不凝露，不結霜

氣 體 禁止有可燃?xì)怏w和導電灰塵

重 量 180克

MechanicalSpecification

Input Voltage 12~36V DC, 12~24V AC

Output current 0.3A~2.0A

Temperature working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity Not condensation , no water droplets

Gas Prohibition of combustible gasesａnd conductive dust

Weight 180g

MechanicalDimension (mm)