性能特點
本系列機床適用于塑料材料的沖裁、拉伸和壓制工藝。如：板料的沖裁、彎曲、翻邊、薄板拉伸、精沖、金屬零件的冷擠壓。也可以用于校正、壓裝、砂輪成型及塑料制品的壓制成型。機床采用液壓傳動形式，具有液壓機和機械壓力機的有點。既能夠任意改變壓制力的大小，不會產生超載，又能夠?qū)崿F(xiàn)壓制過程中各工步的保壓和延時要求。為了實現滑塊快速空程下行和快速回城的目的，機床采用了增速油缸，當接觸到機件時自動轉為慢速工作，減少了所需油泵的排量和電機功率，降低了噪音。工作臺前方可安裝光電保護裝置，在工作臺上方形成保護屏障，以保護操作者的人身安全。機床為集中按鈕，可實現調整、半自動和自動三種操作規范。故本機具有結構新穎、性能可靠、功能齊全、生產效率高等優點，是機械壓力機的換代產品。
Features
YD27 series hydraulic fast press is suitable for punching,stretching and pressing of plastic materials,such as punching,bending,flanging of plate,stretching and fine punching of sheet metal,ａnd cold extrusion of metal part.It may also be used for calibration,press-in,forming of grinding wheel,press forming of plastic products and powder products.
The machine useshydraulic dirving mode and has the advantages of a hydraulic press and a mechanical press. Pressing force of the machine can be changde at will.Over load will not occur in the machine.It can realize pressure keeping and time delay requiemrnts during pressing.In order to relize slipper's quick downwords without load and quick back stroke,the machine adopts speeding-up oil cylinders.The machine began to operate automatically at a slow speed as it cantacts a workpiece which decreases discharge capacity of an oil pump and motor power,ａnd reduces noise.Photoelectric protection device be installed in front of bench,which forms a protection screen on upper of the bench so as to protect operators.It uses centralized buttons,which may realize adjustment,semi-automatic and automatic operations.Thererfore,the machine has the advantages of novel structure,reliable performance, a complete range of functiongs and high production efficiency,ａnd it is a substituting product of a machanical press.
技術參數 Technical paramaters
| 名稱name / 型號Tpye | 25T | 40T | 63T | 80T | 100T | 125T | |
| 公稱力KN Nominal pressure | 250 | 400 | 630 | 800 | 1000 | 1250 | |
| 行程調節器 mm Stroke adjuster | 10-100 | 10-120 | 10-120 | 10-140 | 10-150 | 10-150 | |
| 滑塊行程 mm Slipper max stroke | 120 | 120 | 130 | 140 | 180 | 180 | |
| 裝模高度 mm Loading height | 100-200 | 140-200 | 160-270 | 180-280 | 200-320 | 220-320 | |
| 行程次數 1/min The number of trips | 40-70 | 30-65 | 30-60 | 30-60 | 20-50 | 20-50 | |
| 壓力 Mpa Greatest pressure | 25 | 25 | 25 | 25 | 25 | 25 | |
| 快下速度 m/s Speed to quickly move downwards | 225 | 230 | 220 | 220 | 210 | 250 | |
| 工作速度 m/s Work speed | 10 | 10 | 8 | 8 | 8 | 8 | |
| 回程速度m/s Back stroke speed | 180 | 180 | 180 | 160 | 160 | 150 | |
| 工作臺尺寸 Workbench | 左右mm Left and right | 500 | 590 | 650 | 760 | 820 | 840 |
| 前后mm Front and back | 390 | 440 | 450 | 500 | 580 | 580 | |
| 落料孔mm Blanking hole | 100 | 150 | 150 | 180 | 180 | 200 | |
| 喉口深度 mm Throat Depth | 200 | 250 | 260 | 260 | 300 | 310 | |
| 滑塊 Sider | 前后mm Front and back | 220 | 280 | 320 | 560 | 400 | 400 |
| 模孔柄mm Die handle | 40 | 50 | 50 | 60 | 60 | 60 | |
| 左右mm Left and right | 330 | 440 | 320 | 350 | 610 | 610 | |
| 工作臺離地面高度mm Workbench height form the groud | 500 | 550 | 550 | 600 | 660 | 680 | |
| 主電機功率 KV Motor Power | 5.5 | 5.5 | 5.5 | 7.5 | 11 | 11 | |
機器外形尺寸 Machine dimensions | 左右mm Left and right | 1100 | 1100 | 1250 | 1370 | 1350 | 1600 |
| 前后mm Front and back | 1150 | 1260 | 1450 | 1630 | 1630 | 1850 | |
| 高度mm Hight | 1800 | 1960 | 2270 | 2500 | 2600 | 3400 | |
| 備注 | 可根據客戶需要，定制油缸滑塊行程、喉口深度以及拉伸裝置； According to customer need,custom cylinder slider stroke,thorat depth and stretching device; | ||||||
| 名稱name / 型號Tpye | 160T | 200T | 315T | 400T | ||
| 公稱力KN Nominal pressure | 1600 | 2000 | 3150 | 4000 | ||
| 行程調節器 mm Stroke adjuster | 10-180 | 10-200 | 10-200 | 10-200 | ||
| 滑塊行程 mm Slipper max stroke | 180 | 200 | 200 | 200 | ||
| 裝模高度 mm Loading height | 260-420 | 280-430 | 300-480 | 350-500 | ||
| 行程次數 1/min The number of trips | 20-50 | 20-45 | 20-35 | 18-30 | ||
| 壓力 Mpa Greatest pressure | 25 | 25 | 25 | 25 | ||
| 快下速度 m/s Speed to quickly move downwards | 230 | 240 | 240 | 230 | ||
| 工作速度 m/s Work speed | 8 | 8 | 6 | 5 | ||
| 回程速度m/s Back stroke speed | 150 | 140 | 130 | 130 | ||
| 工作臺尺寸 Workbench | 左右mm Left and right | 940 | 940 | 1100 | 1100 | |
| 前后mm Front and back | 700 | 750 | 900 | 1000 | ||
| 落料孔mm Blanking hole | 220 | 250 | 300 | 300 | ||
| 喉口深度 mm Throat Depth | 380 | 400 | 450 | 500 | ||
| 滑塊 Sider | 前后mm Front and back | 420 | 600 | 800 | 840 | |
| 模孔柄mm Die handle | 70 | 70 | 80 | 80 | ||
| 左右mm Left and right | 720 | 720 | 900 | 920 | ||
| 工作臺離地面高度mm Workbench height form the groud | 700 | 750 | 800 | 840 | ||
| 主電機功率KV Motor Power | 15 | 15 | 30 | 37 | ||
機器外形尺寸 Machine dimensions | 左右mm Left and right | 1700 | 1800 | 2000 | 2200 | |
| 前后mm Front and back | 2000 | 2100 | 2300 | 2500 | ||
| 高度mm Hight | 3500 | 3600 | 3900 | 4000 | ||
| 備注 | 可根據客戶需要，定制油缸滑塊行程、喉口深度以及拉伸裝置；According to customer need,custom cylinder slider stroke,thorat depth and stretching device; | |||||
