SPECIFICATIONS | ||||
ITEM | UNIT | PC-60 | PC-70 | PC-80 |
CAPACITY | ||||
Center height | mm (in.) | 805 (31.69) | 930 (36.61) | 1055 (41.53) |
Swing over bed | mm (in.) | 1560 (61.41) | 1805 (71.06) | 2050 (80.70) |
Swing over cross slide | mm (in.) | 1100 (43.30) | 1350 (53.14) | 1600 (62.99) |
Swing over gap | mm (in.) | 2120 (83.46) | 2370 (93.30) | 2620 (103.14) |
Gap width from headstock | mm (in.) | 600 (23.62) | ||
Distance between centers | mm (in.) | 1500(60), 2000(80), 3000(120), 4000(160), 5000(200), 6000(240), 7000(280), 8000(320), 9000(360), 10000(400), 11000(440), 12000(480) | ||
BED | ||||
Width (W/O Auxiliary guide) | mm (in.) | 920 (36.22) | ||
Width (W Auxiliary guide) | mm (in.) | 1090 (42.91) | ||
CARRIAGE | ||||
Cross slide travel | mm (in.) | 1170 (46.06) | ||
Compound rest travel | mm (in.) | 600 (23.62) | ||
4-way tool post width | mm (in.) | 310 (12.20) | ||
THREDAD FEEDS RANGE | ||||
Longitudinal feed | mm/rev (in/rev) | 0.045~2.55 (0.0018~0.1) | ||
Cross feed | mm/rev (in/rev) | 0.023~1.28 (0.0009~0.05) | ||
Longitudinal rapid feed | mm/min (in/min) | 2000 (78.74) | ||
Cross rapid feed | mm/min (in/min) | 1270 (50) | ||
Metric thread | mm (kinds) | 1~56 (60) | ||
Inch thread | TPI (kinds) | 1/2~28 (60) | ||
Module thread | MOD (kinds) | 0.25~14 (60) | ||
Diameteral pitch thread | DP (kinds) | 2~112 (60) | ||
Pitch of leadscrew | mm (TPI) | 12 (2) | ||
| ||||
Quill diameter | mm (in.) | 160 (6.29) | ||
Quill travel | mm (in.) | 200 (7.87) | ||
Inner taper of quill |
| MT#6 | ||
Bearing surface on bed ways | mm (in.) | 760 (29.92) | ||
MOTOR | ||||
Main spindle motor | KW (HP) | 22(30)-STD. | ||
29(40) / 37(50) / 44(60) / 55(75)-OPT. | ||||
Coolant pump motor | KW (HP) | 0.1 (0.125) | ||
★Specifications captions are subject to change without notice for improvement.
