- The machine is constructed with a single cutterhead and single table.
- The cutterhead is built in the machine base for maximum safety of cutting.
- The spindle is interchangeable. Spindle diameters of dia.1", dia 1 1/4", and 30mm for choice. Specify spindle
- diameter when ordering.
- The router spindle is available on request.
- Centralized control panel provides convenient operation of the machine.
- The table speed varies automatically for highly accurate internal cutting.
- The machine is air operated.
- The cutterhead feed is driven by a combination air/hydraulic system, eliminating the problem of the cutterhead bumping against the workpiece.
- The machine is rigidly constructed for maximum stability in heavy duty cutting.
MODEL | DT-1138 | DT-1120 |
Range of cutting diameter | 4" - 38" | 2" - 20" |
Maximum rectangular cutting (2:1) | 34" x 17" | 20" x 10" |
Table diameter | 52" | 27 - 1/2" |
Table rotation speed (Infinitely variable) | 1.5 - 4RPM | 1.5 - 4RPM |
Spindle speed | 8,000 - 16,000 RPM | 8,000 - 16,000 RPM |
Spindle diameter (interchangeable) | 1",30mm, 11/4" (One dia funished) | 1",30mm, 11/4" (One dia funished) |
Cutter size | 100mm | 100mm |
Follower roller diameter | 100mm | 100mm |
Table drive motor | 2HP x 1 | 1HP x 1 |
Spindle drive motor | 10 HP x 1 | 7 1/2 HP x 1 |
Air pressure required | 70kg/cm2 | 70kg/cm2 |
Net weight | 1880kgs | 920kgs |
Gross weight | 2080 kgs | 1120 kgs |
Packing size ( L x W x H ) | 85" x 66" x 87" | 61" x 56" x 81" |