| 9 SPINDLE ARRANGEMENT | |||
 original |  |  |  |
 |  |  |  |
OUTSTANDING FEATURES FROM POM 4 - SIDE MOULDER
- Major parts of the machine are manufactured from high tensile ductile iron for high durability and rigidity.
- Feed rollers are precision machined from ductile iron, hardened for high durability.
- Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.
- Spindles are precision manufactured from Nickel Chrome Molybdenum alloy steel. Computerized dynamically balanced for smooth running at high speed.
- The spindle and quill are hard chrome plated and precision ground.
- Inserted alloy steel table is carbonized and hard chrome plated for dependable wear resistance and rigidity for years of operations.
- Additional feed rollers make feeding problem stock easy.
- A specially designed gear box provides high torque output accurate transmission and a long service life.
- COMPREHENSIVE SAFETY FEATURES: - Circuit will break if the cutterhead is touched. - The cell sensor detects elevation of the entire feeding mechanism. - The end switch allows for convenient machine running tests.
- The pulleys and motors are dynamically balanced to ensure added stability for the entire machine.
- Convenient lubrication for all spindle bearings.
- Anti-rust treatment for the machine frame.
Look into the difference in the POM 4-SIDE Moulders
Extraording Performance.
-
FLOATING ROLLERS.
The pneumatically controlled universal joint under table creates a floating roller, for outstanding smoothness during stock feed. -
INSERTED ALLOY STEEL TABLE
Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum wear resistance. -
MECHANICAL DIGITAL READOUT
Each spindle is available to be fitted with a mechanical digital readout for accurate spindle setting. -
SHORT STOCK FEED ROLLER
The additional feed rollers are fitted at the front of the 2nd spindle, suited for smooth feeding of short stock. positively and smooth feeding.
OPTIONAL:
-
UNIVERSAL SPINDLE (Optional)
The universal spindle can be swivelled 360* for moulding operations. -
FULL GROOVE TABLE (Optional)
Fitted between the 1st spindle and the initial spindle on the rear bottom spindle set. -
FEED MAGAZINE (Optional)
This feed magazine enables continuous automatic stock feed that greatly increases efficiently. -
TILTING FEED ROLLER (Optional)
This allows for moulding of bevelled workpieces and picture frames et cetera.
- FREQUENCY INVERTER (Optional)
The feed speed is controlled by a frequency inverter providing variable speed feed. -
FULLY ENCLOSED SPLASH GUARD (Optional)
The guard not only provides maximum safety protection for the operator, but also reduces noise to a minimum during cutting operations.
| MODEL | SHG-909U.C.D |
| Maximum width of cut | 230mm |
| Maximum height of cut | 125mm |
| Horziontal top spindle motor | 7.5HP,10HP |
| Horziontal bottom spindle motor | 7.5HP,10HP |
| Right vertical spindle motor | 7.5HP |
| Left vertical spindle motor | 7.5HP |
| Feed drive motor | 7.5HP |
| Elevation motor | 1HP |
| Spindle speed | 6000R.P.M. |
| Feed speed | 4.5-26M/min,4.5~30M/min (inverter) |
| Spindle diameter | 50mm |
| Universal spindle diameter | 40mm |
| Standard cutter diameter | 125mm |
| Maxi 1st bottom spindle diameter | 155mm |
| Maxi Right vert. spindle diameter | 180mm |
| Maxi Left vert. spindle diameter | 180mm |
| Maxi Horz. top spindle diameter | 180mm |
| Maxi Rear bottom spindle diameter | 180mm |
| Net weight | 5400kgs |
| Gross weight | 6000kgs |
| Packing dimensions | 6140x1950x1830 mm |
| Universal spindle (Option) | 10HP,7.5HP |
| Multiple rip saw (Option) | 20HP, 25HP, 30HP |
All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
